| Manufacturer | WEINIG / DIMTER |
|---|---|
| Model | OptiCut 450 |
| Year | 2019 |
| Location | Germany
|
WEINIG / DIMTER OptiCut 450 (manufactured 2019) optimizing cross-cut saw. Supplied specifications and measured data are listed below for evaluation.
Capacities and dimensions
- Maximum cutting/board length: 6,300 mm
- Cutting width / maximum workpiece width: 300 mm
- Wood thickness range: 12 mm to 120 mm
- Maximum rectangular wood sections: 310 × 12 mm and 190 × 120 mm
- Minimum input length: 500 mm
- Minimum fixed length after sawing: 150 mm (minimum fixed length at end of board: 180 mm)
- Minimum wood width for measurement: 30 mm; maximum usable conveyor width: 210 mm
- Maximum board curvature tolerated: 10 mm/m
Cutting, feed and accuracy
- Blade diameter: 500 mm (blade bore: 30 mm)
- Cutting/feed speed: continuously adjustable up to 300 m/min
- Cutting cycle time including braking and acceleration: 0.6–1.0 sec
- Length tolerance: ±3 mm
- Cutting thickness accuracy: ±0.8–1.5 mm
- Minimum fixed length after sawing: 150 mm; minimum fixed length at end of board: 180 mm
Drive and utilities
- Saw motor power: 7.5 kW (10 HP)
- Feed motor power: 5.0 kW (7 HP)
- Vario conveyor motor power: 2.5 kW (3.4 HP)
- Electrical connection / system: approx. 18 kW; operating voltage 400 V / 50 Hz; control voltage 230 VAC / 24 VDC
- Nominal current: 30 A; fuses: 35 A
- Compressed air: approx. 1,200 Nl/min at approx. 8 bar
- Extraction: air velocity approx. 30 m/sec; extraction air volume approx. 1,800 m³/h
Material handling, measurement and sorting
- Board infeed capacity up to 6.3 m; exit conveyor length: 7.5 m
- Sorting conveyor width: 250 mm; usable conveyor width: 210 mm
- Maximum workpiece width: 300 mm
- Automatic width measurement: laser distance sensors (width measurement accuracy max. ±2 mm)
- Number of active products (programs): max. 16
- Scrap pit width: 250 mm; maximum scrap length approx. 120 mm
- Heavy-duty ejector provided for workpieces over 20 kg (ejector plate height: 80 mm)
Controls, marking and operability
- Control panel: OptiCom Pro 18.5" industrial TFT touchscreen (1366 × 768 pixels), front protection IP65
- Marking station: 2 marking positions; marking bench length: 5 m
- Feed direction: left-hand feed
- Working height: 900 mm
- Writing length specification: workpiece length − 10 mm
Operating hours (as listed): 42,874 h
Notes
- All figures above are taken from the supplied machine data and description. No additional testing, refurbishment status, warranty, or location information is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.Working Height: 900 mm
Feed Direction: Left-hand feed
Blade Diameter: 500 mm
Blade Bore: 30 mm
Input Length, Min.: 500 mm
Input Length, Max.: 6,300 mm
Wood Width, Min.: 30 mm
Wood Width, Max.: 310 mm
Wood Thickness, Min.: 12 mm
Wood Thickness, Max.: 120 mm
Maximum Rectangular Wood Section: 310 × 12 mm
Maximum Rectangular Wood Section: 190 × 120 mm
Minimum Fixed Length After Sawing: 150 mm
Minimum Fixed Length at End of Board: 180 mm
Maximum Board Curvature: 10 mm/m
Length Tolerance: ±3 mm
Cutting Thickness Accuracy: ±0.8–1.5 mm
Feed Speed, Continuously Adjustable: Max. 300 m/min
Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec.
Saw Motor Power: 7.5 kW (10 HP)
Feed Motor Power: 5.0 kW (7 HP)
Vario Conveyor Motor Power: 2.5 kW (3.4 HP)
Electrical Connection: Approx. 18 kW
Operating Voltage: 400 V / 50 Hz
Control Voltage: 230 VAC / 24 VDC
Nominal Current: 30 A
Fuses: 35 A
Compressed Air Consumption: Approx. 1,200 Nl/min
Operating Pressure: Approx. 8 bar
Extraction Air Velocity: Approx. 30 m/sec.
Extraction Air Volume: Approx. 1,800 m³/h
Sorting Conveyor Width: 250 mm
Usable Conveyor Width: 210 mm
Maximum Workpiece Width: 300 mm
Exit Conveyor Length: 7.5 m
Automatic Width Measurement: Laser distance sensors
Width Measurement Accuracy: Max. ±2 mm
Number of Active Products: Max. 16
Minimum Wood Thickness for Measurement: 12 mm
Scrap Pit Width: 250 mm
Maximum Scrap Length: Approx. 120 mm
Heavy-Duty Ejector: For workpieces over 20 kg
Ejector Plate Height: 80 mm
Writing Length: Workpiece length − 10 mm
Control Panel: OptiCom Pro 18.5"
Display Type: Industrial TFT touchscreen
Display Resolution: 1366 × 768 pixels
Front Protection: IP65
Board Infeed Capacity: Up to 6.3 m
Marking Station: 2 marking positions
Marking Bench Length: 5 m
Electrical System: 400 V / 50 Hz
UPS: 24 V supply
Operating Hours: 42,874 h
Cutting Speed: 300 m/min
Max. Cutting Length: 6300 mm
Working Width: 300 mm
Workpiece Thickness: 120 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1979 |
| Last activity | Sept. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.Working Height: 900 mm
Feed Direction: Left-hand feed
Blade Diameter: 500 mm
Blade Bore: 30 mm
Input Length, Min.: 500 mm
Input Length, Max.: 6,300 mm
Wood Width, Min.: 30 mm
Wood Width, Max.: 310 mm
Wood Thickness, Min.: 12 mm
Wood Thickness, Max.: 120 mm
Maximum Rectangular Wood Section: 310 × 12 mm
Maximum Rectangular Wood Section: 190 × 120 mm
Minimum Fixed Length After Sawing: 150 mm
Minimum Fixed Length at End of Board: 180 mm
Maximum Board Curvature: 10 mm/m
Length Tolerance: ±3 mm
Cutting Thickness Accuracy: ±0.8–1.5 mm
Feed Speed, Continuously Adjustable: Max. 300 m/min
Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec.
Saw Motor Power: 7.5 kW (10 HP)
Feed Motor Power: 5.0 kW (7 HP)
Vario Conveyor Motor Power: 2.5 kW (3.4 HP)
Electrical Connection: Approx. 18 kW
Operating Voltage: 400 V / 50 Hz
Control Voltage: 230 VAC / 24 VDC
Nominal Current: 30 A
Fuses: 35 A
Compressed Air Consumption: Approx. 1,200 Nl/min
Operating Pressure: Approx. 8 bar
Extraction Air Velocity: Approx. 30 m/sec.
Extraction Air Volume: Approx. 1,800 m³/h
Sorting Conveyor Width: 250 mm
Usable Conveyor Width: 210 mm
Maximum Workpiece Width: 300 mm
Exit Conveyor Length: 7.5 m
Automatic Width Measurement: Laser distance sensors
Width Measurement Accuracy: Max. ±2 mm
Number of Active Products: Max. 16
Minimum Wood Thickness for Measurement: 12 mm
Scrap Pit Width: 250 mm
Maximum Scrap Length: Approx. 120 mm
Heavy-Duty Ejector: For workpieces over 20 kg
Ejector Plate Height: 80 mm
Writing Length: Workpiece length − 10 mm
Control Panel: OptiCom Pro 18.5"
Display Type: Industrial TFT touchscreen
Display Resolution: 1366 × 768 pixels
Front Protection: IP65
Board Infeed Capacity: Up to 6.3 m
Marking Station: 2 marking positions
Marking Bench Length: 5 m
Electrical System: 400 V / 50 Hz
UPS: 24 V supply
Operating Hours: 42,874 h
Cutting Speed: 300 m/min
Max. Cutting Length: 6300 mm
Working Width: 300 mm
Workpiece Thickness: 120 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
WEINIG / DIMTER OptiCut 450 (manufactured 2019) optimizing cross-cut saw. Supplied specifications and measured data are listed below for evaluation.
Capacities and dimensions
- Maximum cutting/board length: 6,300 mm
- Cutting width / maximum workpiece width: 300 mm
- Wood thickness range: 12 mm to 120 mm
- Maximum rectangular wood sections: 310 × 12 mm and 190 × 120 mm
- Minimum input length: 500 mm
- Minimum fixed length after sawing: 150 mm (minimum fixed length at end of board: 180 mm)
- Minimum wood width for measurement: 30 mm; maximum usable conveyor width: 210 mm
- Maximum board curvature tolerated: 10 mm/m
Cutting, feed and accuracy
- Blade diameter: 500 mm (blade bore: 30 mm)
- Cutting/feed speed: continuously adjustable up to 300 m/min
- Cutting cycle time including braking and acceleration: 0.6–1.0 sec
- Length tolerance: ±3 mm
- Cutting thickness accuracy: ±0.8–1.5 mm
- Minimum fixed length after sawing: 150 mm; minimum fixed length at end of board: 180 mm
Drive and utilities
- Saw motor power: 7.5 kW (10 HP)
- Feed motor power: 5.0 kW (7 HP)
- Vario conveyor motor power: 2.5 kW (3.4 HP)
- Electrical connection / system: approx. 18 kW; operating voltage 400 V / 50 Hz; control voltage 230 VAC / 24 VDC
- Nominal current: 30 A; fuses: 35 A
- Compressed air: approx. 1,200 Nl/min at approx. 8 bar
- Extraction: air velocity approx. 30 m/sec; extraction air volume approx. 1,800 m³/h
Material handling, measurement and sorting
- Board infeed capacity up to 6.3 m; exit conveyor length: 7.5 m
- Sorting conveyor width: 250 mm; usable conveyor width: 210 mm
- Maximum workpiece width: 300 mm
- Automatic width measurement: laser distance sensors (width measurement accuracy max. ±2 mm)
- Number of active products (programs): max. 16
- Scrap pit width: 250 mm; maximum scrap length approx. 120 mm
- Heavy-duty ejector provided for workpieces over 20 kg (ejector plate height: 80 mm)
Controls, marking and operability
- Control panel: OptiCom Pro 18.5" industrial TFT touchscreen (1366 × 768 pixels), front protection IP65
- Marking station: 2 marking positions; marking bench length: 5 m
- Feed direction: left-hand feed
- Working height: 900 mm
- Writing length specification: workpiece length − 10 mm
Operating hours (as listed): 42,874 h
Notes
- All figures above are taken from the supplied machine data and description. No additional testing, refurbishment status, warranty, or location information is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1979 |
| Last activity | Sept. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Czech Republic
2016
| Cutting height | 100 mm |
|---|---|
| Cutting width | 300 mm |
| Blade diameter | 500 mm |
| Engine power | 5.5 kW |
| Cutting length | 6300 mm |
|---|---|
| Feeding table length | 7900 mm |
| Cutting speed | 60 rpm |
| Blade diameter | 400 mm |
|---|---|
| Engine power | 15 kW |
| Cutting speed | 3000 rpm |
|---|
Germany
2018
| Cutting height | 120 mm |
|---|---|
| Cutting width | 300 mm |
| Blade diameter | 500 mm |
| Engine power | 7.5 kW |
| Cutting length | 6300 mm |
|---|---|
| Feeding table length | 5600 mm |
| Cutting speed | 100 rpm |
| Cutting length | 6000 mm |
|---|
Czech Republic
2007
| Cutting height | 100 mm |
|---|---|
| Cutting width | 300 mm |
| Blade diameter | 500 mm |
| Engine power | 7.5 kW |
| Cutting length | 6300 mm |
|---|---|
| Feeding table length | 5600 mm |
| Cutting speed | 100 rpm |
| Cutting height | 100 mm |
|---|---|
| Cutting width | 260 mm |
| Engine power | 9 kW |
| Cutting length | 4000 mm |
|---|---|
| Blade diameter | 500 mm |
| Cutting height | 80 mm |
|---|---|
| Cutting width | 300 mm |
| Blade diameter | 500 mm |
| Engine power | 7.5 kW |
| Cutting length | 6.3 mm |
|---|---|
| Feeding table length | 6.3 mm |
| Cutting speed | 150 rpm |
Netherlands
2012
| Cutting length | 7209 mm |
|---|---|
| Feeding table length | 7850 mm |
| Engine power | 7.5 kW |
| Cutting width | 300 mm |
|---|---|
| Blade diameter | 500 mm |
| Cutting height | 80 mm |
|---|---|
| Cutting width | 200 mm |
| Cutting speed | 4600 rpm |
| Cutting length | 3500 mm |
|---|---|
| Blade diameter | 500 mm |
| Engine power | 15 kW |
Italy
2002
| Cutting height | 80 mm |
|---|---|
| Feeding table length | 6300 mm |
| Cutting speed | 150 rpm |
| Cutting width | 300 mm |
|---|---|
| Blade diameter | 500 mm |
| Engine power | 5.5 kW |
| Cutting height | 160 mm |
|---|---|
| Cutting width | 360 mm |
| Engine power | 7.5 kW |
| Cutting length | 6300 mm |
|---|---|
| Blade diameter | 500 mm |
| Cutting height | 100 mm |
|---|---|
| Cutting width | 300 mm |
| Blade diameter | 500 mm |
| Engine power | 7.5 kW |
| Cutting length | 6300 mm |
|---|---|
| Feeding table length | 5600 mm |
| Cutting speed | 100 rpm |
Looking for a used Weinig OptiCut optimizing crosscut saw?
The Weinig OptiCut series is one of the most trusted solutions for high-speed, high-precision wood cutting. Designed for industrial processing, these machines combine automatic optimization, accurate sorting, and exceptional repeatability to handle everything from solid wood cutting to defect removal and production of fixed lengths.
At Exapro, we connect buyers with verified sellers offering popular models such as the OptiCut S50, OptiCut S90, OptiCut S100, and OptiCut S200. Whether used for joinery, packaging, furniture production, or mass timber processing, Weinig OptiCut machines deliver industry-leading efficiency.
Choosing a used Weinig OptiCut machine allows manufacturers to boost throughput, reduce waste, and automate cutting operations while significantly lowering their investment compared with new machinery.
Explore all available Weinig OptiCut machines on Exapro today.
Оптимизиращ напречен трион WEINIG / DIMTER OptiCut 450
Optimalizační příčná pila WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Optimerende tværsav
WEINIG / DIMTER OptiCut 450 Kappoptimiersäge
Βελτιστοποιητικό εγκάρσιο πριόνι WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Cross-cut optimizing saw
Sierra tronzadora optimizadora WEINIG / DIMTER OptiCut 450
Scie d’optimisation transversale WEINIG / DIMTER OptiCut 450
Optimizacijska poprečna pila WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Optimalizáló keresztvágó fűrész
Sega ottimizzatrice di troncatrice WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Optimizuojantis skersinio pjovimo pjūklas
WEINIG / DIMTER OptiCut 450 Optimaliserende afkortzaag
Optymalizacyjna piła poprzeczna WEINIG / DIMTER OptiCut 450
Serra otimizadora de corte transversal WEINIG / DIMTER OptiCut 450
Ferăstrău de optimizare pentru tăiere transversală WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Оптимизационная торцовочная пила
Optimizaciona poprečna testera WEINIG / DIMTER OptiCut 450
WEINIG / DIMTER OptiCut 450 Optimerande kap- och tvärsåg
Optimize çapraz kesme testeresi WEINIG / DIMTER OptiCut 450
Poland
Spain
English (EU)
English (GB)