Contact us to receive an offer.
| Manufacturer | GETINGE |
|---|---|
| Model | Trans Smart S 550 double gate |
| Year | 2019 |
| Location | Spain
|
Manufacturer: GETINGE
Model: Trans Smart S 550 double gate
Year manufactured: 2019
Overview:
This is a Trans Smart series steam sterilizer intended for hospital and general sterilization use. It is described as a fully automatic steam sterilizer with a number of preset programs for common sterilization processes. Program cycles are described as employing mechanical air extraction using a series of vacuum/pressure pulses to remove air and support effective sterilization. The chamber and internal surfaces are specified as AISI 316L stainless steel with corresponding coating. The unit description lists an integrated drying system, process monitoring and a printer supplied as standard.
Doors and loading:
The unit is described as having automatic vertical sliding doors and a chamber layout adapted for sterilization with wire baskets (ISO / STU) or containers according to DIN.
Standards and compliance:
The listing references compliance with multiple directives and standards, including Medical Device Directive 93/42/EEC and EN/ISO 13485 and EN 285, among others and several EU directives related to machinery, electrical safety, EMC, PED and environmental directives.
Visible components and identification (to be verified):
- Touchscreen control panel mounted in the upper central area of the front panel.
- Yellow emergency stop button on the right-side panel.
- Two round gauges located near the lower-right front panel.
- Stainless steel exterior with a black control-area trim and front-loading door alignment/cabinet construction.
- Manufacturer nameplate bearing TRANS GETINGE, a CE mark and an indication of "Made in TURKEY." An "Autoclave 2" label is present on the left door panel.
Condition and verification:
The description above compiles the unit’s stated features and observed identification/controls. Prospective buyers should verify specifications, functional condition, and included accessories with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Trans Smart S 555, is a fully automatic steam sterilizer. The equipment has a number of preset programs for the most common sterilization processes in hospital and general use. The program cycles employ mechanical air extraction with a series of vacuum/pressure pulses to effectively remove the air ensuring sterilization. The dimensions of the chamber are adapted to sterilization, using wire baskets according to ISO and STU or containers according to DIN. The device has a capacity of up to 555 L. The temperature range is 121°C to 135° C.
Key features
AISI 316L stainless steel chamber and coating.
Automatic vertical sliding doors.
Drying system.
Process monitoring.
Printer as standard
Standards and codes
TRANS SMART sterilizers are designed to meet the following requirements and standards:
Medical Device Directive 93/42/EEC
Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
Directive 2014/30/EU EMC
2014/68/EU PED Pressure Equipment Directive
2011/65/EU ROHS 2 Restriction of Hazardous Substances Directive
2012/19/EU WEEE 2 Waste Electrical and Electronic Equipment Directive
EN/ISO 13485 Medical Device Quality Management Systems
EN ISO 14971 Risk Management for Medical Devices.
EN 285 Sterilization - Steam Sterilized - Large Sterilizers
EN / ISO 17665-1 Sterilization - Moist Heat - Routine Validation and Control
EN/IEC 61010-2-040 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-040: Particular requirements for sterilizers and disinfectant washers used to treat medical materials.
EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use IEC 61326-1.
EN/ISO 9001 Quality Management Systems -Requirements
EN ISO 14001 Environmental Management Systems: Requirements with Guidance for Use.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Aug. 13, 2026 |
Trans Smart S 555, is a fully automatic steam sterilizer. The equipment has a number of preset programs for the most common sterilization processes in hospital and general use. The program cycles employ mechanical air extraction with a series of vacuum/pressure pulses to effectively remove the air ensuring sterilization. The dimensions of the chamber are adapted to sterilization, using wire baskets according to ISO and STU or containers according to DIN. The device has a capacity of up to 555 L. The temperature range is 121°C to 135° C.
Key features
AISI 316L stainless steel chamber and coating.
Automatic vertical sliding doors.
Drying system.
Process monitoring.
Printer as standard
Standards and codes
TRANS SMART sterilizers are designed to meet the following requirements and standards:
Medical Device Directive 93/42/EEC
Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
Directive 2014/30/EU EMC
2014/68/EU PED Pressure Equipment Directive
2011/65/EU ROHS 2 Restriction of Hazardous Substances Directive
2012/19/EU WEEE 2 Waste Electrical and Electronic Equipment Directive
EN/ISO 13485 Medical Device Quality Management Systems
EN ISO 14971 Risk Management for Medical Devices.
EN 285 Sterilization - Steam Sterilized - Large Sterilizers
EN / ISO 17665-1 Sterilization - Moist Heat - Routine Validation and Control
EN/IEC 61010-2-040 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-040: Particular requirements for sterilizers and disinfectant washers used to treat medical materials.
EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use IEC 61326-1.
EN/ISO 9001 Quality Management Systems -Requirements
EN ISO 14001 Environmental Management Systems: Requirements with Guidance for Use.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: GETINGE
Model: Trans Smart S 550 double gate
Year manufactured: 2019
Overview:
This is a Trans Smart series steam sterilizer intended for hospital and general sterilization use. It is described as a fully automatic steam sterilizer with a number of preset programs for common sterilization processes. Program cycles are described as employing mechanical air extraction using a series of vacuum/pressure pulses to remove air and support effective sterilization. The chamber and internal surfaces are specified as AISI 316L stainless steel with corresponding coating. The unit description lists an integrated drying system, process monitoring and a printer supplied as standard.
Doors and loading:
The unit is described as having automatic vertical sliding doors and a chamber layout adapted for sterilization with wire baskets (ISO / STU) or containers according to DIN.
Standards and compliance:
The listing references compliance with multiple directives and standards, including Medical Device Directive 93/42/EEC and EN/ISO 13485 and EN 285, among others and several EU directives related to machinery, electrical safety, EMC, PED and environmental directives.
Visible components and identification (to be verified):
- Touchscreen control panel mounted in the upper central area of the front panel.
- Yellow emergency stop button on the right-side panel.
- Two round gauges located near the lower-right front panel.
- Stainless steel exterior with a black control-area trim and front-loading door alignment/cabinet construction.
- Manufacturer nameplate bearing TRANS GETINGE, a CE mark and an indication of "Made in TURKEY." An "Autoclave 2" label is present on the left door panel.
Condition and verification:
The description above compiles the unit’s stated features and observed identification/controls. Prospective buyers should verify specifications, functional condition, and included accessories with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Aug. 13, 2026 |
Лабораторен автоклав GETINGE Trans Smart S 550 с двойна врата
Laboratorní autokláv GETINGE Trans Smart S 550 s dvojitými dvířky
GETINGE Trans Smart S 550 laboratorieautoklave med dobbeltlåge
GETINGE Trans Smart S 550 Labor-Autoklav mit Doppeltür
GETINGE Trans Smart S 550: Εργαστηριακός αυτόκλειστος διπλής πόρτας
GETINGE Trans Smart S 550 double gate Laboratory autoclave
Autoclave de laboratorio GETINGE Trans Smart S 550 de doble puerta
Autoclave de laboratoire GETINGE Trans Smart S 550 à double porte
GETINGE Trans Smart S 550 laboratorijski autoklav s dvostrukim vratima
GETINGE Trans Smart S 550 kétkapus laboratóriumi autokláv
Autoclave da laboratorio GETINGE Trans Smart S 550 a doppia porta
„GETINGE Trans Smart S 550“ dviejų durų laboratorinis autoklavas
GETINGE Trans Smart S 550 laboratoriumautoclaaf met dubbele deur
Autoklaw laboratoryjny GETINGE Trans Smart S 550 z podwójnymi drzwiami
Autoclave de laboratório GETINGE Trans Smart S 550 de porta dupla
Autoclavă de laborator GETINGE Trans Smart S 550 cu două uși
Лабораторный автоклав GETINGE Trans Smart S 550 с двумя дверцами
GETINGE Trans Smart S 550 dvovratni laboratorijski autoklav
GETINGE Trans Smart S 550, laboratorieautoklav med dubbla luckor
GETINGE Trans Smart S 550 çift kapılı laboratuvar otoklavı
English (EU)
English (GB)