| Manufacturer | TECNINOX |
|---|---|
| Model | PIBI DUELL 50/50 |
| Year | 2016 |
| Location | Italy
|
This Tecninox PIBI DUELL 50/50 pass-through chamber, manufactured in 2016, is designed for secure material transfer between adjoining rooms in cleanroom and laboratory environments. Constructed entirely of stainless steel (AISI 304 polished finish), it measures 840 mm in length, 500 mm in width, and 1975 mm in height, with a weight of approximately 100 kg. The working area inside the chamber is 500x500x800 mm.
The chamber features a glass door with a handle, allowing easy access to the interior, which includes a perforated metal floor and racks for organized placement of materials. The door operates with an interlock system that permits only one door to open at a time, ensuring minimal loss of room pressure and maintaining cleanroom integrity.
Operation is controlled via a Siemens PLC, with a control panel located on the right side of the unit. This panel includes multiple colored buttons (green, red, yellow, black) and a large red emergency stop button, providing clear status indications and operational control. Indicator lights signal door status: green for door unlocking and readiness to open, and red during washing cycles when doors are locked.
The chamber’s washing cycle activates automatically when a load is inserted from the "dirty side" and the door closes. This cycle includes laminar airflow and UV sterilization, supported by a centrifugal fan whose speed is adjustable via a regulator in the technical compartment. The standard washing cycle duration is factory-set to five minutes but can be customized to user requirements.
Air filtration is provided by a single H14 HEPA filter (305 x 457 x 68 mm) meeting CEN EN 1822 standards, with lateral access for filter replacement. Two UV lamps are positioned on the side to enhance sterilization.
The unit complies with cleanroom classification standards below ISO 5 and operates on 230 V, 50 Hz power supply with electrical protection class IP44. The equipment is in good condition with clean surfaces and no visible damage, suitable for use in pharmaceutical, chemical, cosmetics, food, dietary, medical device, and manufacturing sectors where contamination control is critical.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
DESCRIPTION:
Pass-through chambers protect critical environments while allowing transfer of materials to or from adjoining rooms. Typical installations are in the walls of cleanrooms and laboratories. In these applications, materials must be transferred with minimal loss of room pressure; and without the need for personnel movement between rooms. Standard chambers have an interlock that permits only one door to be opened at time and ensures clean operation.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
All stainless steel construction. The washing cycles and corresponding door lock are managed by a Siemens PLC. The green light, which is on when the machine is in stand-by mode, indicates that the associated door is free and the opening is possible. By pressing the black button, the door opens on the side and the operator can load the products inside the Pass Box. If the load is inserted from the "dirty side", as soon as the door closes, a washing cycle (laminar flow and UV sterilization) starts. If the load is inserted from the "clean side", the door opening on the side «dirty» can take place when the door on the "dirty side" is closed. During the washing cycle, the red light remains on both sides to indicate that neither door can be unlocked. During the washing cycle, the centrifugal fan is switched on and the air flow from the filter is laminar. The speed of the centrifugal fan can be adjusted through the regulator located in the technical compartment, accessible from the panel on the «dirty» side. The duration of each cycle is set at the factory to 5 minutes, but can be adjusted according to the user’s needs.
Year: 2016
TECHNICAL DATA:
External dimensions (LxWxH): 840x500x1975mm
Working area dimensions (LxLxH): 500x500x800 mm
Materials and finishes: AISI 304 Poli
Weight: 100 kg
Clean room classification: < ISO 5
Electrical Power
Electric class : Class 1
Tension: 230 V - 50 Hz
Protection class: IP 44
Inlet air filtration system
Filter dimensions: N. 1 H14 HEPA filter 305 x 457 x 68 mm
Classification CEN EN 1822: H14
Fixing: mechanical
Filter replacement: lateral
UV Lamps
Nr. e positioning: N. 1+1 on the side
Control Panel
• N. 1 red emergency button
• N. 1 green light for door locking
• N. 1 green light for door unlocking
• N. 1 black START button
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1271 |
| Last activity | Sept. 6, 2026 |
DESCRIPTION:
Pass-through chambers protect critical environments while allowing transfer of materials to or from adjoining rooms. Typical installations are in the walls of cleanrooms and laboratories. In these applications, materials must be transferred with minimal loss of room pressure; and without the need for personnel movement between rooms. Standard chambers have an interlock that permits only one door to be opened at time and ensures clean operation.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
All stainless steel construction. The washing cycles and corresponding door lock are managed by a Siemens PLC. The green light, which is on when the machine is in stand-by mode, indicates that the associated door is free and the opening is possible. By pressing the black button, the door opens on the side and the operator can load the products inside the Pass Box. If the load is inserted from the "dirty side", as soon as the door closes, a washing cycle (laminar flow and UV sterilization) starts. If the load is inserted from the "clean side", the door opening on the side «dirty» can take place when the door on the "dirty side" is closed. During the washing cycle, the red light remains on both sides to indicate that neither door can be unlocked. During the washing cycle, the centrifugal fan is switched on and the air flow from the filter is laminar. The speed of the centrifugal fan can be adjusted through the regulator located in the technical compartment, accessible from the panel on the «dirty» side. The duration of each cycle is set at the factory to 5 minutes, but can be adjusted according to the user’s needs.
Year: 2016
TECHNICAL DATA:
External dimensions (LxWxH): 840x500x1975mm
Working area dimensions (LxLxH): 500x500x800 mm
Materials and finishes: AISI 304 Poli
Weight: 100 kg
Clean room classification: < ISO 5
Electrical Power
Electric class : Class 1
Tension: 230 V - 50 Hz
Protection class: IP 44
Inlet air filtration system
Filter dimensions: N. 1 H14 HEPA filter 305 x 457 x 68 mm
Classification CEN EN 1822: H14
Fixing: mechanical
Filter replacement: lateral
UV Lamps
Nr. e positioning: N. 1+1 on the side
Control Panel
• N. 1 red emergency button
• N. 1 green light for door locking
• N. 1 green light for door unlocking
• N. 1 black START button
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Tecninox PIBI DUELL 50/50 pass-through chamber, manufactured in 2016, is designed for secure material transfer between adjoining rooms in cleanroom and laboratory environments. Constructed entirely of stainless steel (AISI 304 polished finish), it measures 840 mm in length, 500 mm in width, and 1975 mm in height, with a weight of approximately 100 kg. The working area inside the chamber is 500x500x800 mm.
The chamber features a glass door with a handle, allowing easy access to the interior, which includes a perforated metal floor and racks for organized placement of materials. The door operates with an interlock system that permits only one door to open at a time, ensuring minimal loss of room pressure and maintaining cleanroom integrity.
Operation is controlled via a Siemens PLC, with a control panel located on the right side of the unit. This panel includes multiple colored buttons (green, red, yellow, black) and a large red emergency stop button, providing clear status indications and operational control. Indicator lights signal door status: green for door unlocking and readiness to open, and red during washing cycles when doors are locked.
The chamber’s washing cycle activates automatically when a load is inserted from the "dirty side" and the door closes. This cycle includes laminar airflow and UV sterilization, supported by a centrifugal fan whose speed is adjustable via a regulator in the technical compartment. The standard washing cycle duration is factory-set to five minutes but can be customized to user requirements.
Air filtration is provided by a single H14 HEPA filter (305 x 457 x 68 mm) meeting CEN EN 1822 standards, with lateral access for filter replacement. Two UV lamps are positioned on the side to enhance sterilization.
The unit complies with cleanroom classification standards below ISO 5 and operates on 230 V, 50 Hz power supply with electrical protection class IP44. The equipment is in good condition with clean surfaces and no visible damage, suitable for use in pharmaceutical, chemical, cosmetics, food, dietary, medical device, and manufacturing sectors where contamination control is critical.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1271 |
| Last activity | Sept. 6, 2026 |
TECNINOX PIBI DUELL 50/50
Laboratorní vybavení TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50 Laborzubehör
TECNINOX PIBI DUELL 50/50
TECNINOX MOD.PIBI DUELL 50/50 - pass-through chamber used
Equipo de laboratorio TECNINOX PIBI DUELL 50/50
Equipement de laboratoire TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50 - passamateriali usata
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
Urządzenie laboratoryjne TECNINOX PIBI DUELL 50/50
Equipamento de laboratório TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50 Лабораторное оборудование
TECNINOX PIBI DUELL 50/50
TECNINOX PIBI DUELL 50/50
Laboratuvar ekipmanları TECNINOX PIBI DUELL 50/50
English (EU)
English (GB)