WMW-ZEULENRODA PED 63.2

Germany

Stroke length	500 mm
Table width	630 mm
Force	250 T

Table length	1250 mm
Engine Power	kW

Price on request

View product

GFM SX-10 Radial Forging Machine (fully overhauled in 2024)

Italy 1971

Stroke length	1290 mm

Force	1250 T

Price on request

View product

GFM SX-13 Radial Forging Machine (fully overhauled in 2022)

Italy 1974

Engine Power	300 kW

Force	640 T

Price on request

View product

GFM SX-32 Radial Forging Machine

Spain 1977

Radial Forging Machine GFM SX-32 The main equipment includes: - Manipulator A - Manipulator B - GFM 32 forging machine - N° 2 loading and unloading clamps - Transport roller track Technical data: - No. of forging hammers: 4 - Forging pressure of each hammer: 500 Mp = 5,000 bar - N° of strokes for each hammer: 310 strokes/min - Rated power each forging motor: 2 x 250 kW - Hydraulic pump motor power: 100 kW - Loading - unloading pincers motor power: N° 2 x 37 kW - Hammer length: 480 mm - Maximum raw piece diameter: 320 mm - Max hammer adjustment area: 210 mm - Largest forging diameter: Non-alloyed and low-alloy construction steel: 320 mm/Ø ….. 290 mm/Ø Biggest clamping diameter in clamping head: 320 mm High and special-alloyed steels: smaller dimensions - Max workpiece length: 3000 mm - Rapid traverse speed of clamping heads: 500mm/sec - Manipulator gripping stroke: A 3,800 mm - Manipulator gripping stroke: B 4.400 mm - Cooling water consumption: 70 m3/h - Cooling water pressure: 3 – 5 bar - Max compressed air pressure: 5 bar - Compressed air consumption: 2 Nm3/min - Forging axis pass line from zero plane: 600 mm …

Price on request

View product

GFM SX-16 Radial Forging GFM model SX-16 (fully overhauled in 2022)

Italy

Year: 1974 / 2022 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging:6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A:6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power …

Price on request

View product

HURSAN AP 77/240 Press

Italy 2026

Stroke length	400 mm
Table width	350 mm
Force	100 T

Table length	1000 mm
Engine Power	11 kW

6,020 £

View product

TCS 300-TON MOLD TEST

Italy

Table length	3500 mm
Force	300 T

Table width	2500 mm

Price on request

View product

Remu DCM 1800 Ton - Die-casting

Italy ~ 2012

PLC Vipa / S7 - Siemens 15 ”Touch Monitor 6 Radial (2 in fixed and 4 in mobile) 1 Removable column Columns diameter: 290 mm Column passage: 1250 x 1250 mm Mobile platen travel: 1050 mm Shifter stroke: 700 mm Maximum shelf opening: 2.250 mm Aluminum arm loader Overall dimensions of the machine 12.770 x 4.000 x 4.440 mm - Weight: 110.000 Kg Base, Protections, Spare Parts - Complete with Documentation and CE Certification. -FERGAL basin oven Mod. FBFG-07 Siemens S7 PLC Capacity: 2.000 Kg Fume extraction hood included any accessories available separately: - INDUSTRIALFRIGO Gas double zone temperature control unit 24 + 24Kw. - INDUSTRIALFRIGO 50 Kw chiller group. - Evaporative tower MITA 30.000Kcal / h. -Group for CastoMix BARALDI emulsion. - ABB extractor robot to be overhauled.

91,500 £

View product

Completely overhauled as new IMR C40 die-casting machine

Italy 2021

Refurbished IMR C40 Die-Casting Machine Completely refurbished to like-new condition NEW tank New electrical system New hydraulic system Control panel with Siemens PLC and touchscreen for setting cycle times and operating cycles New solenoid valves New motor-pump unit Excludes optional extras such as: - perimeter guards - safety photocells - oil

Price on request

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

HYDRAULIC PRESS 400/200/3x50 - 1500x1400 Hydraulic press 400T Triple action active punching - year 2022 Low working hours

France 2022

Stroke length	850 mm
Table width	1400 mm
Force	400 T

Table length	1500 mm
Engine Power	175 kW

213,000 £ Price is negotiable

View product

HYDRAULIC PRESS OMERA 1200 Ton.

Italy 1998

OMERA 1200 Ton Hydraulic Press in excellent working condition, carefully maintained and fully operational. The machine is immediately available for inspection and can be viewed under power during operation by prior appointment, allowing customers to verify its performance, accuracy, and overall condition. This press is suitable for heavy-duty metal forming, deep drawing, stamping, and industrial manufacturing applications. It represents a reliable solution for companies seeking a high-capacity hydraulic press from a well-known Italian manufacturer. Our company can also provide technical assistance, dismantling, loading, transportation, installation, and commissioning services upon request. For further technical information, photographs, videos, or to arrange an inspection, please do not hesitate to contact us.

Price on request

View product

Retread Hot & Cold tyre retread Factory-Full plant Machinery

Kosovo 2012

We sell all retreadinf tyre plant , Tbr , Pcr, Suv, C , Hot retread & Cold Retread Many sizes, Many machineries, All made in Italy, (Marigo , Cima, Cezap)

688,000 £

View product

Complete zinc electroplating line – 300 t/year – 2014

Slovakia 2014

Complete industrial line for electrolytic zinc plating, offered as one technological unit with associated equipment and accessories. Key data: • Year: 2014 • Manufacturer: ATF s.r.o. • Process: electrolytic zinc plating with blue passivation; optional organic sealing • Zinc coating thickness: 8–13 µm • Corrosion resistance: up to 240 hours in salt spray testing • Bath dimensions: 1,200 × 800 × 670 mm • Loading: barrel / rack • Nominal capacity: approx. 300 tonnes/year • Electrical supply: 400 V / 3 Ph / 50 Hz • Handling system power: 20 kW • • CE marked The package includes the electroplating line and associated technological equipment visible in the photographs, including process/rinsing tanks, handling and transport equipment, electrical cabinets and control, filtration/water-treatment related equipment, laboratory equipment and related accessories. Exact scope of supply to be confirmed in the sales agreement. Inspection by prior arrangement. Technical documentation and further information available to serious buyers. Price on request.

Price on request

View product

Italy MF 03/200 PULSAR Foundry furnace

Bulgaria 2001

Electric medium-frequency induction furnaces, model MF 03/200 PULSAR: • Rated power 200 kW • Useful capacity 300 kg • Input line voltage 380 V • Mains frequency 50 Hz • Furnace operating frequency 1000 Hz • Power factor 0.9 • Operating temperature 1400 – 1500 °C • Maximum temperature 1600 °C • Melting time 1 h • Cooling water necessary 0.25 m³/h • Inlet water temperature 20° - 30°C • Inlet water pressure 3 bar

132,000 £

View product