Product Title: Lundberg Wet Electrostatic Precipitator (WESP) Manufacturer: Lundberg Model: Wet Electrostatic Precipitator Year of Manufacture: 2016 Technical Condition: As-is, where-is Weight: 130,000 Pounds Description: The Lundberg Wet Electrostatic Precipitator (WESP) is designed to effectively remove particulate matter emissions from exhaust gas streams using electrostatic forces. This advanced particulate matter control device utilizes an intense electric field to ionize and capture particles and droplets onto a collection surface. With the capability to achieve up to 99% collection efficiency and an outlet loading of less than 10 mg/Nm³, this WESP addresses one of the most challenging environmental control issues faced by industries today. The collection of fine particulate emissions, particularly sub-micron particles such as PM 2.5, is critical for protecting human health and combating smog. As regulatory demands increase for the reduction of these emissions, the Lundberg Wet Electrostatic Precipitator offers a viable solution with reasonable capital and operating costs.
Sales of KGJ Tedom QUANTO C400 with an electrical output of 408 kW and a thermal output of 561 kW. Year of manufacture 2007. Fuel natural gas. Rise 56,542 MTH. Condition after failure, repairable, last GO in 2013. Weight 11 tons, dimensions: W: 2.1 m, H: 3.4 m, D: 4.3 m. Ready for pickup. Price 1 mil.CZK negotiable.
The hydrogen installation "HyStat 1000S 10/10" is on sale. Not exploited. Year of release 2008. The main technical characteristics are shown in the photographs.
Frequency converter from SIEMENS, 2400 kW/690 VAC, installed and commissioned by Siemens Energy Norway. The equipment was originally intended for a hybrid fishing boat project, but the project never went ahead. Everything is unused and has been in storage for some time. Main Propulsion Port – Siemens Siemens SICUBE Cabinet 1st Section: A4 Chopper 2nd Section: A1 Control and Rectifier PLC S7-300, CPU 315-2 PN/DP SINAMICS Control Unit CU320 SIMATIC NET Communication Processor CP 342-5 Siemens analog modules Siemens digital modules Bender Isometer Frequency relay TAS-311DG, etc. 3rd Section: +A10 Inverter, + Siemens HMI 6" Touch Panel SINAMICS Motor Module, Duty Class I Model: 6SL3325-1TG41-3AA0 Input: DC 675–1080 V, 1550 A Output: 3-phase AC, 0–0.75 × input voltage, 1270 A, 1200 kW SCCR = 170 kA (see equipment manual) Pulse frequency: 1.25 kHz Weight: 220 kg 4th Section: +A11 Inverter SINAMICS Motor Module, Duty Class I Model: 6SL3325-1TG41-3AA0 Input: DC 675–1080 V, 1550 A Output: 3-phase AC, 0–0.75 × input voltage, 1270 A, 1200 kW SCCR = 170 kA (see equipment manual) Pulse frequency: 1.25 kHz Weight: 220 kg 5th Section: +A3 Cooling System
Manufacturer: Coatema Machine type: Simultaneous slot-die coating line Application: Research and development / pilot-scale coating Original application: Laser drying research for battery electrodes Drying section: Approx. 1 m Configuration: Custom-built research machine Current condition: Disassembled Operating hours: Less than 1,000 h (approx.) Year of manufacture: 2020
Complete container transformer substation available for sale. The unit includes: * MV/LV transformer station in steel container, * transformer, * medium voltage switchgear, * low voltage switchgear, * internal electrical installation, * ventilation and access equipment. Suitable for: * photovoltaic projects, * industrial plants, * temporary power supply, * infrastructure and utility projects. The station was previously operated in industrial environment and is offered as complete unit. Equipment is located in Poland. Loading assistance available. Additional technical documentation, nameplates and detailed photos available on request. KEYWORDS: compact substation container transformer MV/LV station transformer station 630 kVA transformer electrical substation power distribution station
Horizontal Electrostatic Painting Line complete Horizontal Painting Line consisting of: A. PRE-TREATMENT LINE: Consisting of: 1 Five (5) Pre-treatment tank with internal dimensions 7,5mx1,1mx1,8m, made of INOX AISI 316 3mm thick, properly reinforced, with overflow system, drain valve 3” and air stirring system, with electrical heating (4x5Κw) 22-30 οC, complete with electrical control board: 3) Double position dryer 120oC (7,5mx1,8mx1,8m aprox, internal dimensions), re-circulated air heated through direct heat exchanger with burner (not direct flame or fumes in treated profiles), equipped with horizontal air flow of the re-circulated air, on top opening covered by horizontal automated doors, complete with electrical control system, Dual door system: B. POWDER COATING LINE: Consisting of: 1) Oven 200oC, type “BOX”, of clear length 7,2m and width 2.48m for the coating of 8 large flight bars (maximum profile length 7,0m, height 2,0m) with automated ventilation for the removal of volatile gases (new technology) and system for parallel polymerization of multiple colors. The oven recirculates 48.000 m3/hour, through 3 centrifugal fans. The curing is done automatically, from a selection of adjustable user programs. Oven is controlled by central Power and Automation Electrical Board. Air pneumatic doors operation system are included at the system. 2) Overhead conveyor …
Spanner Re2 GmbH cogeneration plant with 45 kW electric and 110 kW thermal power including gasifier and cogenerator (5.7 L GM engine and ABB generator) Optional: It is also possible to purchase a wood chip dryer to be connected to the gasifier with augers and hopper.
Equipped biomass power plant with the necessary infrastructure The Biomass power plant includes a Siemens turbine with a guaranteed electric power of 1,998 kW. The plant needs approximately 1.8 tons of biomass for each MWh produced. electricity. The power plant uses biomass as the main fuel. The plant requires approximately 1.8 tons of biomass for each produced MWh en. eclectic. When determining the reference fuel, the residual biomass from forestry work was taken into account. The resulting fuel is a mixture of various species found in the areas intended to power the power plant. The maximum size of biomass particles must not exceed 70 x 30 x 30 mm and the density of the shredded material must be between 250 and 300 kg/m3. Type of material: shredded wood, sawdust and shavings etc. which gives 19.76 MJ/kg. The power plant basically consists of a grate boiler using forest residues as fuel and a condensing steam turbine generator. The condenser is cooled by a closed system based on cooling towers. Gases from the boiler are subjected to a cleaning and purification process to ensure that the level of particulate emissions through the chimney complies with applicable regulations.