MASMEC LMN20 automatic FFP2 mask production line

Italy 2021

MASMEC LMN20 automatic line for the production of FFP2 masks is for sale. It is available for production reorganization. The line is designed for the production of FFP2 masks and includes the main operating stations: roll feeding and pulling, profile welding and nosepiece insertion, elastic earloop welding with marking, mask cutting, and unloading. The technical documentation indicates a modular configuration from M.0 to M.4 with stations OP10, OP20, OP30, and OP40. Main features: Approximate productivity: 45 pieces/minute with 1 logistics operator Roll feeding up to 6 rolls Nosepiece insertion Mask profile welding Elastic band welding using an ultrasonic system Inkjet marking system Mask cutting and unloading Electrical panel with Siemens PLC HMI with joystick for manual movements Power supply: 400 V three-phase, 50 Hz Pneumatic circuit with minimum pressure of 5.5 bar Polycarbonate perimeter guards and optical safety barrier Technical documentation available upon request. Machine can be viewed by appointment. Disassembly, transport, installation, and testing are the responsibility of the buyer. Sold in as-is condition.

25,500 £ Price is negotiable

View product

Forsberg 50V Gravity Separator

USA

Engine power	1.11857 kW

Price on request

View product

MAC 54ST9 Dust collector

USA 2010

Engine power	0.55928 kW

Price on request

View product

IOB AUE EKO 60/40/150-36

Germany 2010

total power requirement 38 kW degree ....500 Grad weight of the machine ca. 2,5 t

Price on request

View product

AKG Thermotechnik Hydraulic Oil Reservoir Tank 55L 10 Bar P/N 0979.003.x024

Finland 2011

High Flow Oilcooler The Hega Antriebstechnik ACM 160 M-4 is a heavy-duty, high-flow oil cooler designed primarily to cool oil in large industrial machinery, such as hydraulic systems, power plants, and marine equipment. It is characterized by its robust design and the ability to operate its multiple cooling units independently. The reservoir is built for reliable operation under demanding conditions and can be used as a replacement or spare component where a 55-liter hydraulic oil tank is required. Manufacturer Part Number: 0979.003.x024 Type: Hydraulic Oil Reservoir / Tank Fluid: Hydraulic Oil Capacity: 55 Liters Operating Pressure (PS): 10 bar Test Pressure (PT): 15 bar Maximum Operating Temperature (TS): 120°C Motor Type: AC Induction Motor Current Type: AC Phase: Three Phase Rated Power: 11 kW (50 Hz) / 13.2 kW (60 Hz) Voltage: 380–420V / 660–720V (50 Hz) Speed: 1460 RPM / 1750 RPM Protection: IP55 Insulation Class: F Duty Rating: S1 Continuous Frame Size: 160M

11,000 £ Price is negotiable

View product

Fanuc CRX 25 cobot Low working hours

Norway 2023

Selling our Fanuc CRX25(30). Very low running hours, only in a couple of deveoplement project. Our company is a test and innovation center, so never been used in production. Except for a small crack in the teach pendant(fully working), It is as good as new. See pictures for installed software options. Main specc: Payload: 25(30)kg Reach: 1889(1756)mm Speed: 1000ms Axis: 6 Footprint: ø283 Controller: R-30iB Plus, table TP pendant. Voltage: 230V IP Rating: 67

18,000 £ Price is negotiable

View product

Artech Artech Recyclingtechnik GmbH - Rotorschere RS 95/160-55 - Shredders - 2004 Machine

France 2004

Engine power	110 kW

88,000 £

View product

MIX S.r.l. A-MXKH Machine Hot deal

Germany 2024

Engine power	37 kW

20,500 £ Price is negotiable

View product

TROTEC Speedy 300 – 80W – 2022 – Like-new condition – Available immediately Hot deal

France 2022

Engine power	0.08 kW

25,500 £

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

PAUSS EASY 18WH Machine Low working hours

Spain 2013

Engine power	3 kW

12,500 £

View product

The Meyer brand machine vision system, model LD30 Low working hours

Spain 2018

Engine power	1.5 kW

20,500 £ Price is negotiable

View product

Novoflow - DMK NF-LC-M 500 Machine Low working hours

Austria 2023

Engine power	0.5 kW

Price on request

View product

Dynajet UHP 220 Machine

France 2021

Engine power	160 kW

56,000 £ Price is negotiable

View product

RUNI SK200AUTO Machine

Spain 2024

Engine power	4 kW

17,000 £ Price is negotiable

View product

KLT Container Washer, Washer for Various Items

Poland 2022

Crates, KLT inserts and lids - through-feed washing system. washmachine KLT, crate washer Automatyczna myjka do pojemnikow KLT, pralka tac - mycie - plukanie - odolejanie - suszenie - 2 tory - 600 KLT /godz Crates, KLT inserts and lids - through washing system. Items to be cleaned: 600 pieces/h per lane Maximum throughput width 300 mm Maximum throughput height 650 mm Contamination: Dust, mineral grease, mineral oil, metal chips System description The system and piping are made of high-quality stainless steel and therefore guarantee a long service life for the system. The machine is a (2)-track chain conveyor machine. The unique modular design allows an existing system to be expanded at any time, thus ensuring that the system does not become too small. If necessary, the system can grow with the company or with additional requirements. Hot water heating: Heat exchanger in the washbasins for the heating circuit. Flow temperature recommended 90°C Nozzle pipes: Screwed Oil separator Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks. Wash ware counter on both lanes. System features: Stainless steel inlet module - Stainless steel wash module 1 - Stainless steel washing module 2 - Stainless steel cold air blow-off - …

35,500 £

View product

Tecnitude TRE-10M3 feed hopper

France 2023

Engine power	2 kW

24,500 £ Price is negotiable

View product

CNC digital hot-wire polystyrene cutting machine Low working hours

France 2020

Engine power	5.5 kW

Price on request

View product

Laser marking and engraving machine co2 3D dynamic Galvo Golden laser

Poland 2014

Golden Laser ZJ9045 275W CO2 RF metal laser ROFIN OEM 20 after refil(warranty to 06.2023) 3D dynamic galvanometer control system with Germany Scanlab Galvo head. Automatic up and down Z axis. Automatic shuttle zinc-iron alloy honeycomb working table. Use-friendly 5 inches LCD screen CNC system. Rear exhaust suction system. High speed engraving cutting and perforating of leather, shoe uppers, fabrics, jeans labels, papers and every non-metal materials Germany Scanlab Galvo head and Rofin laser tube make machine ever more stable. Japan servo motor USA lens Working area: 900mmX450mm very good condition

Price on request

View product

PVD Vacuum Metallising System — 2m Vertical Chamber, ~2,000 Hours (Metaliser / Metalizer / Metallizer / Metalliser)

Malta 2019

Engine power	35 kW

33,000 £

View product

Yamaha M2 I-PULSE Machine

Italy 2006

Manufacturer: I-Pulse / Yamaha Model: M2 Year of manufacture: 2006 Condition: Used – in working order I-Pulse Yamaha M2 SMT Pick and Place machine, year 2006, in good working order. The machine is used regularly in production lines and has always been subject to periodic maintenance. Currently operational and available for testing. For technical data, refer to the Yamaha documentation. It is a reliable and proven solution, suitable for medium-production SMT lines or as an integration/backup in existing I-Pulse lines. It comes with manuals, 3 removable trolleys for feeders, and a series of electromechanical feeders of various models (8, 12, 16 mm). Together with this P&P, we can supply another M2 to be used for spare parts and components. Upon request, we can provide detailed information, videos, or other materials.

9,600 £ Price is negotiable

View product

Used Miscellaneous machines for sale

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free