Contact us to receive an offer.
| Manufacturer | Mios |
|---|---|
| Model | T20 |
| Year | 1990 |
| Location | Italy
|
| Category | Forging - Eccentric presses |
| Power in tons | 200 T |
| Table width | 9.05512 in |
| Nbr of strokes/min | 60 |
| Engine Power | 2 HP |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Mios T20 |
| Last availability date | 05/09/2026 |
| Product id | P260824025 |
| Language |
Ексцентрикова преса Mios T20
Excentrický lis Mios T20
Mios T20 Excenterpresse
Mios T20 Exzenterpresse
Εκκεντρική πρέσα Mios T20
Mios T20 Eccentric press
Prensa excéntrica Mios T20
Presse excentrique Mios T20
Ekscentarska preša Mios T20
Mios T20 Excenteres prés
Pressa eccentrica Mios T20
Mios T20 Ekscentrinis presas
Mios T20 Excenterpers
Prasa mimośrodowa Mios T20
Prensa excêntrica Mios T20
Presă excentrică Mios T20
Mios T20 Кривошипный пресс
Ekscentarska presa Mios T20
Mios T20 Excenterpress
Eksantrik pres Mios T20
|
Eccentric press offered: Manufacturer Mios, Model T20. Type: Eccentric press intended for forging/pressing operations. Year of manufacture: 1990. Condition: Used — described as in good condition.
Key specifications provided:
- Press force: 200.0 tons
- Table width: 230.0 mm
- Strokes per minute: 60.0
- Engine power: 2.0 HP
Description
This Mios T20 eccentric press is a heavy-capacity mechanical press with a 200-ton nominal pressing force and a relatively high nominal stroke rate of 60 strokes per minute. The machine has a compact table width of 230 mm and is driven by a 2.0 HP motor as specified. It is identified as a forging/ eccentric press and is listed as used and in good condition.
Notes for prospective buyers
- Condition is listed as "used, in good condition." The seller does not indicate testing status, warranty, or refurbishment; interested buyers should request current operational checks and documentation if needed.
- Confirm availability and condition of controls, clutch/brake system, ram and tooling interfaces, electrical wiring, and any required safety guards before purchase.
- Verify any tooling, dies, or accessories you require are included or available separately.
- Ask for up-to-date photographs, maintenance records, and a run test (if applicable and permitted) to assess mechanical and electrical condition.
If you need a shorter spec summary or a printable spec sheet based on the data above, I can prepare that.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Mios
Model: T20
Year of manufacture: 1990
Type: Eccentric press
Condition: Used, in good condition
Power in tons: 200.0
Table width: 230.0 mm
Strokes per minute: 60.0
Engine power: 2.0 HP
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Mios T20 listed on Exapro?
This Mios T20 eccentric press is listed on Exapro.
Is the machine listed on Exapro?
This Mios T20 eccentric press is associated with the Exapro listing at https://www.exapro.it/mios-t20-p260824025.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 4, 2026 |
Manufacturer: Mios
Model: T20
Year of manufacture: 1990
Type: Eccentric press
Condition: Used, in good condition
Power in tons: 200.0
Table width: 230.0 mm
Strokes per minute: 60.0
Engine power: 2.0 HP
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Mios T20 listed on Exapro?
This Mios T20 eccentric press is listed on Exapro.
Is the machine listed on Exapro?
This Mios T20 eccentric press is associated with the Exapro listing at https://www.exapro.it/mios-t20-p260824025.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Forging - Eccentric presses |
| Power in tons | 200 T |
| Table width | 9.05512 in |
| Nbr of strokes/min | 60 |
| Engine Power | 2 HP |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Mios T20 |
| Last availability date | 05/09/2026 |
| Product id | P260824025 |
| Language |
Ексцентрикова преса Mios T20
Excentrický lis Mios T20
Mios T20 Excenterpresse
Mios T20 Exzenterpresse
Εκκεντρική πρέσα Mios T20
Mios T20 Eccentric press
Prensa excéntrica Mios T20
Presse excentrique Mios T20
Ekscentarska preša Mios T20
Mios T20 Excenteres prés
Pressa eccentrica Mios T20
Mios T20 Ekscentrinis presas
Mios T20 Excenterpers
Prasa mimośrodowa Mios T20
Prensa excêntrica Mios T20
Presă excentrică Mios T20
Mios T20 Кривошипный пресс
Ekscentarska presa Mios T20
Mios T20 Excenterpress
Eksantrik pres Mios T20
|
Eccentric press offered: Manufacturer Mios, Model T20. Type: Eccentric press intended for forging/pressing operations. Year of manufacture: 1990. Condition: Used — described as in good condition.
Key specifications provided:
- Press force: 200.0 tons
- Table width: 230.0 mm
- Strokes per minute: 60.0
- Engine power: 2.0 HP
Description
This Mios T20 eccentric press is a heavy-capacity mechanical press with a 200-ton nominal pressing force and a relatively high nominal stroke rate of 60 strokes per minute. The machine has a compact table width of 230 mm and is driven by a 2.0 HP motor as specified. It is identified as a forging/ eccentric press and is listed as used and in good condition.
Notes for prospective buyers
- Condition is listed as "used, in good condition." The seller does not indicate testing status, warranty, or refurbishment; interested buyers should request current operational checks and documentation if needed.
- Confirm availability and condition of controls, clutch/brake system, ram and tooling interfaces, electrical wiring, and any required safety guards before purchase.
- Verify any tooling, dies, or accessories you require are included or available separately.
- Ask for up-to-date photographs, maintenance records, and a run test (if applicable and permitted) to assess mechanical and electrical condition.
If you need a shorter spec summary or a printable spec sheet based on the data above, I can prepare that.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 4, 2026 |
Croatia
2004
| Power in tons | 40 T |
|---|---|
| Table width | 650 mm |
| Nbr of strokes/min | 80 |
| Engine Power | 4 kW |
| Table length | 480 mm |
|---|---|
| Ram stroke | 240 mm |
| Distance between columns | 240 mm |
Italy
1999
| Power in tons | 315 T |
|---|---|
| Table width | 800 mm |
| Table length | 1400 mm |
|---|---|
| Engine Power | 31.5 kW |
Czech Republic
| Power in tons | 315 T |
|---|---|
| Table width | 800 mm |
| Table length | 1400 mm |
|---|
Italy
| Power in tons | 35 T |
|---|---|
| Table width | mm |
| Nbr of strokes/min | 140 |
| Engine Power | kW |
| Table length | mm |
|---|---|
| Ram stroke | 75 mm |
| Distance between columns | mm |
Turkey
1978
| Power in tons | 60 T |
|---|---|
| Table width | mm |
| Nbr of strokes/min | 250 |
| Engine Power | 50 kW |
| Table length | mm |
|---|---|
| Ram stroke | 76.2 mm |
| Distance between columns | mm |
| Nbr of strokes/min | 10.5 |
|---|
| Nbr of strokes/min | 6.5 |
|---|
USA
EN
- Languages
English (EU)