| Manufacturer | BRUDERER |
|---|---|
| Model | BSTA 25 EL BBV190 |
| Year | 1989 |
| Location | Serbia
|
Bruderer BSTA 25 EL (BSTA 25 EL BBV190) H‑Frame high‑speed stamping press, year of manufacture 1989. Nominal force 250 kN (25 tons). Engine power listed as 30 kW. Machine weight approx. 5,000 kg. Listed as well-maintained.
Key specifications and clearances:
- Type: H‑Frame
- Nominal capacity: 250 kN (25 tons)
- Year: 1989
- Engine power: 30 kW
- Table dimensions: 640 × 530 mm
- Ram stroke: 36 mm
- Adjustable stroke positions: 13, 16, 19, 25, 32, 38 mm
- Slide/ram adjustment: 51 mm
- Number of strokes/min: 1,350 (maximum speed noted as 1,350 spm)
- Working speed: 1,350 mm/s
- Distance between columns: 650 mm
- Longitudinal passage: 640 mm; lateral passage: 220 mm
- Machine weight: approximately 5,000 kg
Feeder and feeding data:
- Fitted with a Bruderer BBV 190/85 roll feeder (right-hand side)
- Maximum strip width: 160 mm
- Feed length: variable, up to 85 mm
Standard equipment and mounting:
- Front and rear safety guards
- Oil pump and heat-exchange oil cooler
- Mounted on four spring feet for vibration isolation
- Documentation included
- Optional sound-insulating cabin available (noted as optional)
Notes and consistency: the listing gives both a ram stroke of 36 mm and adjustable stroke positions up to 38 mm; these figures are presented as provided. No performance guarantees (tested/working/refurbished/warranty) are stated in the provided information. Additional technical or operational details, service history, or inspection results are not included here and should be requested if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
A well-maintained Bruderer BSTA 25 EL high-speed stamping press from 1989. Nominal force 250 kN (25 tons), with six adjustable stroke positions (13–38 mm) and a maximum speed of 1,350 spm. Equipped with a Bruderer BBV 190/85 roll feeder (right-hand side) for strip widths up to 160 mm and variable feed lengths up to 85 mm. Table dimensions 640 × 530 mm; longitudinal passage 640 mm, lateral passage 220 mm. Ram adjustment 51 mm. Machine weight approx. 5,000 kg; mounted on four spring feet for vibration isolation. Standard equipment includes front and rear safety guards, oil pump, and heat-exchange oil cooler. Optional sound-insulating cabin available. Full documentation included.
Make and model: Bruderer BSTA 25 EL
Year of manufacture: 1989
Nominal capacity: 250 kN, 25 tons
Max. number of strokes: 100/1350
Adjustable stroke: 13, 16, 19, 25, 32, 38 mm
Slide/Ram adjustment: 51 mm
Table dimensions: 640 x 530 mm
Passage between the supports: Longitudinal 640 mm; Lateral 220 mm
Fitted with roll feeder BBV 190/85 on right hand side.
Max width of strip: 160 mm
Feed length: variable up to 85 mm max
Optional: Sound insulating cabin
Oil pump. Heat exchange oil cooler.
Front and rear safety guards.
Fitted on 4 spring feet.
Documentation included.
Press weight cca. 5000 kg.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 27 |
| Last activity | Sept. 3, 2026 |
A well-maintained Bruderer BSTA 25 EL high-speed stamping press from 1989. Nominal force 250 kN (25 tons), with six adjustable stroke positions (13–38 mm) and a maximum speed of 1,350 spm. Equipped with a Bruderer BBV 190/85 roll feeder (right-hand side) for strip widths up to 160 mm and variable feed lengths up to 85 mm. Table dimensions 640 × 530 mm; longitudinal passage 640 mm, lateral passage 220 mm. Ram adjustment 51 mm. Machine weight approx. 5,000 kg; mounted on four spring feet for vibration isolation. Standard equipment includes front and rear safety guards, oil pump, and heat-exchange oil cooler. Optional sound-insulating cabin available. Full documentation included.
Make and model: Bruderer BSTA 25 EL
Year of manufacture: 1989
Nominal capacity: 250 kN, 25 tons
Max. number of strokes: 100/1350
Adjustable stroke: 13, 16, 19, 25, 32, 38 mm
Slide/Ram adjustment: 51 mm
Table dimensions: 640 x 530 mm
Passage between the supports: Longitudinal 640 mm; Lateral 220 mm
Fitted with roll feeder BBV 190/85 on right hand side.
Max width of strip: 160 mm
Feed length: variable up to 85 mm max
Optional: Sound insulating cabin
Oil pump. Heat exchange oil cooler.
Front and rear safety guards.
Fitted on 4 spring feet.
Documentation included.
Press weight cca. 5000 kg.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Bruderer BSTA 25 EL (BSTA 25 EL BBV190) H‑Frame high‑speed stamping press, year of manufacture 1989. Nominal force 250 kN (25 tons). Engine power listed as 30 kW. Machine weight approx. 5,000 kg. Listed as well-maintained.
Key specifications and clearances:
- Type: H‑Frame
- Nominal capacity: 250 kN (25 tons)
- Year: 1989
- Engine power: 30 kW
- Table dimensions: 640 × 530 mm
- Ram stroke: 36 mm
- Adjustable stroke positions: 13, 16, 19, 25, 32, 38 mm
- Slide/ram adjustment: 51 mm
- Number of strokes/min: 1,350 (maximum speed noted as 1,350 spm)
- Working speed: 1,350 mm/s
- Distance between columns: 650 mm
- Longitudinal passage: 640 mm; lateral passage: 220 mm
- Machine weight: approximately 5,000 kg
Feeder and feeding data:
- Fitted with a Bruderer BBV 190/85 roll feeder (right-hand side)
- Maximum strip width: 160 mm
- Feed length: variable, up to 85 mm
Standard equipment and mounting:
- Front and rear safety guards
- Oil pump and heat-exchange oil cooler
- Mounted on four spring feet for vibration isolation
- Documentation included
- Optional sound-insulating cabin available (noted as optional)
Notes and consistency: the listing gives both a ram stroke of 36 mm and adjustable stroke positions up to 38 mm; these figures are presented as provided. No performance guarantees (tested/working/refurbished/warranty) are stated in the provided information. Additional technical or operational details, service history, or inspection results are not included here and should be requested if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 27 |
| Last activity | Sept. 3, 2026 |
Механична преса BRUDERER BSTA 25 EL BBV190
Mechanický lis BRUDERER BSTA 25 EL BBV190
BRUDERER BSTA 25 EL BBV190 Mekanisk presse
BRUDERER BSTA 25 EL BBV190 Mechanische Presse
Μηχανική πρέσα BRUDERER BSTA 25 EL BBV190
Bruderer BSTA 25 EL High Speed Automatic Press
Prensa mecánica BRUDERER BSTA 25 EL BBV190
Presse mécanique BRUDERER BSTA 25 EL BBV190
Mehanička preša BRUDERER BSTA 25 EL BBV190
BRUDERER BSTA 25 EL BBV190 Mechanikus prés
Pressa meccanica BRUDERER BSTA 25 EL BBV190
BRUDERER BSTA 25 EL BBV190 Mechaninis presas
BRUDERER BSTA 25 EL BBV190 Mechanische pers
Prasa mechaniczna BRUDERER BSTA 25 EL BBV190
Prensa mecânica BRUDERER BSTA 25 EL BBV190
Presă mecanică BRUDERER BSTA 25 EL BBV190
BRUDERER BSTA 25 EL BBV190 Механический пресс
Mehanička presa BRUDERER BSTA 25 EL BBV190
BRUDERER BSTA 25 EL BBV190 Mekanisk press
Mekanik pres BRUDERER BSTA 25 EL BBV190
EN
- Languages
English (EU)