| Manufacturer | HAULICK |
|---|---|
| Model | h602 |
| Year | |
| Location | Germany
|
Manufacturer: HAULICK
Model: h602
Listed category: Cutting - Hydraulic guillotine shears
Description:
This HAULICK h602 is a bench/pedestal-mounted cutting machine offered in the Cutting - Hydraulic guillotine shears category. It features a flat rectangular machined worktable with a rolled front edge and two small round holes located near the left side of the table. The table includes a sliding guide/rail and a clamping/guide block with a short lever on the right-hand guide for positioning and securing material. Adjustment hardware under the table comprises a threaded adjustment screw with a T-handle and a handwheel/black handle at the left front for fine adjustments.
Cutting components and drive:
A circular cutting disc/blade is mounted on a spindle above the table and is secured with a spindle nut and washer; a small guard collar is present around the spindle. A large electric motor is mounted to the lower right side of the machine and a curved/curved-mesh belt guard connects the motor to the upper spindle area. A manufacturer label plate is visible on the motor housing (text not transcribed). There is a manual lever/handwheel on the right side of the upper housing and an electrical cable running from the motor area along the base to the machine.
Structure and accessories:
The machine is mounted on a cast pedestal base. In the supplied photos the unit is shown set on a wooden pallet and a long flat metal strap or panel is resting across the base/pallet.
Condition:
Exterior green paint shows chipping and surface wear across the machine. Table and adjacent castings exhibit scratches, minor surface staining/discoloration and light rust in places. The motor housing and base also show paint wear.
Notes:
There appears to be a tapered tool holder or spindle protruding below the table and the long flat strap across the pallet is present; these observations are less certain and should be verified by inspection. A physical inspection is recommended to confirm mechanical condition, completeness of accessories and suitability for intended use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 75 |
| Last activity | Sept. 6, 2026 |
Juergen Kaiser Werkzeugmaschinen is a trusted specialist in the trade of new and used machine tools, providing reliable solutions for workshops and industrial manufacturers. With strong experience in the machinery market, the company stands for competence, precision, and professional support at every stage of the purchasing process.
The portfolio includes carefully selected machines from well known manufacturers, ensuring high technical standards, durability, and dependable performance. Each solution is chosen with attention to quality and suitability, helping customers find the right equipment for their production requirements.
Juergen Kaiser Werkzeugmaschinen supports clients with a discreet and customer focused approach, offering expert guidance to identify the most efficient and cost effective solution. Whether sourcing a single machine or supporting a larger project, the company combines market knowledge with practical experience to deliver results.
Built on reliability and long term partnerships, Juergen Kaiser Werkzeugmaschinen is a dependable partner for businesses looking for the right machine, the right price, and the right advice.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: HAULICK
Model: h602
Listed category: Cutting - Hydraulic guillotine shears
Description:
This HAULICK h602 is a bench/pedestal-mounted cutting machine offered in the Cutting - Hydraulic guillotine shears category. It features a flat rectangular machined worktable with a rolled front edge and two small round holes located near the left side of the table. The table includes a sliding guide/rail and a clamping/guide block with a short lever on the right-hand guide for positioning and securing material. Adjustment hardware under the table comprises a threaded adjustment screw with a T-handle and a handwheel/black handle at the left front for fine adjustments.
Cutting components and drive:
A circular cutting disc/blade is mounted on a spindle above the table and is secured with a spindle nut and washer; a small guard collar is present around the spindle. A large electric motor is mounted to the lower right side of the machine and a curved/curved-mesh belt guard connects the motor to the upper spindle area. A manufacturer label plate is visible on the motor housing (text not transcribed). There is a manual lever/handwheel on the right side of the upper housing and an electrical cable running from the motor area along the base to the machine.
Structure and accessories:
The machine is mounted on a cast pedestal base. In the supplied photos the unit is shown set on a wooden pallet and a long flat metal strap or panel is resting across the base/pallet.
Condition:
Exterior green paint shows chipping and surface wear across the machine. Table and adjacent castings exhibit scratches, minor surface staining/discoloration and light rust in places. The motor housing and base also show paint wear.
Notes:
There appears to be a tapered tool holder or spindle protruding below the table and the long flat strap across the pallet is present; these observations are less certain and should be verified by inspection. A physical inspection is recommended to confirm mechanical condition, completeness of accessories and suitability for intended use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 75 |
| Last activity | Sept. 6, 2026 |
Juergen Kaiser Werkzeugmaschinen is a trusted specialist in the trade of new and used machine tools, providing reliable solutions for workshops and industrial manufacturers. With strong experience in the machinery market, the company stands for competence, precision, and professional support at every stage of the purchasing process.
The portfolio includes carefully selected machines from well known manufacturers, ensuring high technical standards, durability, and dependable performance. Each solution is chosen with attention to quality and suitability, helping customers find the right equipment for their production requirements.
Juergen Kaiser Werkzeugmaschinen supports clients with a discreet and customer focused approach, offering expert guidance to identify the most efficient and cost effective solution. Whether sourcing a single machine or supporting a larger project, the company combines market knowledge with practical experience to deliver results.
Built on reliability and long term partnerships, Juergen Kaiser Werkzeugmaschinen is a dependable partner for businesses looking for the right machine, the right price, and the right advice.
Хидравлична гилотинна ножица HAULICK h602
Hydraulické gilotinové nůžky HAULICK h602
HAULICK h602 Hydraulisk guillotinesaks
HAULICK h602 Hydraulische Tafelschere
Υδραυλικά ψαλίδια γκιλοτίνας HAULICK h602
HAULICK h602 Hydraulic guillotine shear
Cizalla guillotina hidráulica HAULICK h602
Cisaille guillotine hydraulique HAULICK h602
Hidraulične giljotinske škare HAULICK h602
HAULICK h602 Hidraulikus lemezolló
Cesoia a ghigliottina idraulica HAULICK h602
HAULICK h602 Hidraulinės giljotininės žirklės
HAULICK h602 Hydraulische guillotineschaar
Hydrauliczne nożyce gilotynowe HAULICK h602
Guilhotina hidráulica HAULICK h602
Foarfeci ghilotină hidraulice HAULICK h602
HAULICK h602 Гидравлические гильотинные ножницы
Hidraulične giljotinske makaze HAULICK h602
HAULICK h602 Hydraulisk giljotinsax
Hidrolik giyotin makası HAULICK h602
English (EU)
English (GB)