| Manufacturer | Davi |
|---|---|
| Model | MCO3034 |
| Year | 1997 |
| Location | Italy
|
Description
Hydraulic bending machine with 3 rollers and pre-clamping, model MCO3034 by Davi. The specified specifications are a capacity of 3000 x 20 mm and pre-bending of 16 mm. The machine is designed for rolling/bending sheet metal within the stated parameters.
Key Technical Data
- Working sheet width: 3000 mm
- Rolling capacity: 20 mm
- Pre-bending: 16 mm
- Upper roller: Ø 340 mm
- Roller surface (length): 3050 mm
- Minimum rolling diameter: 430 mm (depends on sheet thickness and material strength limit)
Configuration and Equipment
- Three rollers, hydraulically driven; each roller has a separate motor and gearbox
- Rollers with high-resistant hardened surface, mounted on bearings
- Hydraulic conical device for sheet bending
- Digital position readers for position control
- Parallelism between upper and lower rollers ensured by a torsion bar
- Hydraulic overload protection for rollers and synchronized hydraulic rotation
- Built-in hydraulic unit
- Speed control via hydraulic distributor with lever
- Central control panel mounted at the front with ability to rotate left and right
- Emergency and safety stop system
- Original manuals included
Buyer Notes
The specified data are taken from the machine's technical description. We recommend inspection and verification on site to assess the current technical and operational condition, as well as clarification of specific accessories and possible consumables before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
3-roll hydraulic plate bending machine with pre-pinch
Model MCO3034 Davi capacity 3000x20 mm
-Plate width 3000 mm
-Capacity rolling 20 mm
-Prebend 16 mm
------- TECHNICAL DATA
Top roll 340 mm
Surface on the rolls 3050 mm
MINIMUM ROLLING DIAMETER ID 430 MM
depending on plate thickness and plate yield strength
CONFIGURATION:
-Rolls hardened high strength surface
-Conical plate bending attachment hydraulic
-Digital position readouts
2xplate support left and right side hydraulic ( see photo )
-3 rolls driven hydraulic powered with individual motor & gear box on each roll.
-Parallelism between top and bottom rollers by torsion bar.
-Rolls installed on bearings
-Overload safety hydraulic protection of the rolls
-Synchronized speed hydraulic rotation of the rolls.
-Hydraulic unit self enclosed into the machine.
-Speed infinitely variable control with leverage hydraulic distributor
-Centralized operator control panel hinged on the front floating left right
-Emergency shutdown and safety stop system
-Manuals original
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 21 |
| Last activity | Sept. 4, 2026 |
3-roll hydraulic plate bending machine with pre-pinch
Model MCO3034 Davi capacity 3000x20 mm
-Plate width 3000 mm
-Capacity rolling 20 mm
-Prebend 16 mm
------- TECHNICAL DATA
Top roll 340 mm
Surface on the rolls 3050 mm
MINIMUM ROLLING DIAMETER ID 430 MM
depending on plate thickness and plate yield strength
CONFIGURATION:
-Rolls hardened high strength surface
-Conical plate bending attachment hydraulic
-Digital position readouts
2xplate support left and right side hydraulic ( see photo )
-3 rolls driven hydraulic powered with individual motor & gear box on each roll.
-Parallelism between top and bottom rollers by torsion bar.
-Rolls installed on bearings
-Overload safety hydraulic protection of the rolls
-Synchronized speed hydraulic rotation of the rolls.
-Hydraulic unit self enclosed into the machine.
-Speed infinitely variable control with leverage hydraulic distributor
-Centralized operator control panel hinged on the front floating left right
-Emergency shutdown and safety stop system
-Manuals original
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Description
Hydraulic bending machine with 3 rollers and pre-clamping, model MCO3034 by Davi. The specified specifications are a capacity of 3000 x 20 mm and pre-bending of 16 mm. The machine is designed for rolling/bending sheet metal within the stated parameters.
Key Technical Data
- Working sheet width: 3000 mm
- Rolling capacity: 20 mm
- Pre-bending: 16 mm
- Upper roller: Ø 340 mm
- Roller surface (length): 3050 mm
- Minimum rolling diameter: 430 mm (depends on sheet thickness and material strength limit)
Configuration and Equipment
- Three rollers, hydraulically driven; each roller has a separate motor and gearbox
- Rollers with high-resistant hardened surface, mounted on bearings
- Hydraulic conical device for sheet bending
- Digital position readers for position control
- Parallelism between upper and lower rollers ensured by a torsion bar
- Hydraulic overload protection for rollers and synchronized hydraulic rotation
- Built-in hydraulic unit
- Speed control via hydraulic distributor with lever
- Central control panel mounted at the front with ability to rotate left and right
- Emergency and safety stop system
- Original manuals included
Buyer Notes
The specified data are taken from the machine's technical description. We recommend inspection and verification on site to assess the current technical and operational condition, as well as clarification of specific accessories and possible consumables before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 21 |
| Last activity | Sept. 4, 2026 |
Четиривалова машина за огъване на листов материал Davi MCO3034
Čtyřválcová zakružovačka plechu Davi MCO3034
Davi MCO3034 4-valset pladevalsemaskine
Davi MCO3034 4-Walzen-Blechbiegemaschine
Κυλινδρομηχανή λαμαρίνας 4 κυλίνδρων Davi MCO3034
Davi MCO3034 4-roll plate rolling machine
Cilindros curvadores de chapa de 4 rodillos Davi MCO3034
Rouleuse de tôle à 4 rouleaux Davi MCO3034
Četverovaljni valjak za savijanje lima Davi MCO3034
Davi MCO3034 Négyhengeres lemezhengerítő gép
Calandra per lamiera a 4 rulli Davi MCO3034
Davi MCO3034 4 velenų skardos valcavimo staklė
Davi MCO3034 4-rollen plaatwalsmachine
Walcarka do blachy 4-walcowa Davi MCO3034
Calandra de chapa de 4 rolos Davi MCO3034
Mașină de rulat tablă cu 4 role Davi MCO3034
Davi MCO3034 Четырёхвалковая листогибочная машина
Četvorovaljni valjak za savijanje lima Davi MCO3034
Davi MCO3034 4-vals plåtvalsmaskin
4 toplu silindir büküm makinesi Davi MCO3034
English (EU)
English (GB)