Contact us to receive an offer.
| Manufacturer | Alfa Laval |
|---|---|
| Model | Brew 20 |
| Year | 2022 |
| Location | France
|
Alfa Laval Clara 20 / Brew 20 disc centrifuge for beer clarification, manufactured in 2022. This self‑cleaning separator is designed to remove yeast and suspended solids prior to beer maturation or bottling. The unit is skid‑mounted and supplied with separator, motor, valves, sensors, flow meters, instrumentation and a control cabinet with an Alfa Laval EPC 60 interface.
Key identification
- Brand: Alfa Laval
- Model: Clara 20 / Brew 20
- Year: 2022
- Control system: Alfa Laval EPC 60 interface
- CE declaration: available
Separator and process specifications
- Manufacturer’s stated capacity: 4 to 15 hl/h depending on product and settings
- Typical operating flow rate observed: 0.8 to 1.2 m³/h (8 to 12 hl/h); maximum observed up to approximately 15 hl/h
- Maximum bowl speed: 9,267 rpm; observed operating speed approximately 9,000 rpm
- Drive shaft speed: 3,600 rpm; separator frequency: 60 Hz
- Recommended motor power: 4.0 kW
- Maximum densities: incoming product 1,100 kg/m³; sediments 1,499 kg/m³; operating fluid 1,000 kg/m³
- Operating temperature range: 0 to 100 °C
- Hermetic design to limit oxygen uptake during clarification
Electrical and control details
- Power supply: 380 to 500 V AC, three‑phase; frequency 50 or 60 Hz
- Breaking capacity: 10 kA; control voltage: 24 V DC
- Electrical schematic reference: 9661856844, revision R04
- Control panel manufacturer: Oneness Controlpanels Pvt. Ltd.; manufacturing date April 2022; country of origin: India
Operational modes and utilities
- Available modes: standby, production, CIP cleaning, discharge and slurry pump
- Required utilities: water, compressed air and electrical power
- Inlet/outlet pressure reported at 4–6 bar; fermenter pressure reported at approximately 0.8 bar
Documentation, inspection and sale conditions
Alfa Laval technical documentation and the CE declaration are available. The unit is suitable for cleaning‑in‑place in accordance with site procedures. Equipment inspection can be arranged by appointment. Accessories, connections and conditions for disassembly, transport, recommissioning and qualification should be confirmed with the seller before a firm offer is made.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Alfa Laval Clara 20 / Brew 20 centrifuge for beer clarification, manufactured in 2022.
This self-cleaning disc centrifuge is designed to separate yeast and suspended solids prior to beer maturation or bottling. The unit is mounted on a compact skid that includes the separator, motor, valves, sensors, flow meters, instrumentation, and control cabinet.
Brand: Alfa Laval
Model: Clara 20 / Brew 20
Year: 2022
Product number: 881228-08-02
Control system: Alfa Laval EPC 60 interface
Manufacturer’s capacity: 4 to 15 hl/h depending on the product and settings
Flow rate observed on site: Up to approximately 15 hl/h
Location: Basque Country, France
Price: To be determined after initial contact
Separator specifications:
* Maximum bowl speed: 9,267 rpm
* Drive shaft speed: 3,600 rpm
* Separator frequency: 60 Hz
* Recommended motor power: 4.0 kW
* Maximum density of incoming product: 1,100 kg/m³
* Maximum density of sediments: 1,499 kg/m³
* Maximum density of the operating fluid: 1,000 kg/m³
* Operating temperature: 0 to 100 degrees Celsius
Electrical specifications:
* Power supply: 380 to 500 V AC
* Three-phase power supply
* Frequency: 50 or 60 Hz
* Breaking capacity: 10 kA
* Control voltage: 24 V DC
* Standards: IEC / EN
* Electrical schematic: 9661856844, revision R04
* Control panel manufacturer: Oneness Controlpanels Pvt. Ltd.
* Control panel manufacturing date: April 2022
* Control panel country of origin: India
* CE Declaration available
Operating conditions observed on site:
* Operating speed: Approximately 9,000 rpm
* Typical operating flow rate: 0.8 to 1.2 m³/h, or 8 to 12 hl/h
* Maximum flow rate used: Approximately 15 hl/h
* Inlet and outlet pressure: 4 to 6 bar
* Fermenter pressure: Approximately 0.8 bar
* Available modes: Standby, production, CIP cleaning, discharge, and slurry pump
* Required utilities: Water, compressed air, and electrical power
The hermetic design limits oxygen uptake during clarification. The production, standby, CIP cleaning, and discharge cycles are controlled via the EPC 60 interface. The machine is suitable for cleaning in place (CIP) in accordance with site procedures.
The equipment can be inspected by appointment. Alfa Laval technical documentation, the CE declaration, and internal procedures are available. Accessories, connections, and conditions for disassembly, transport, recommissioning, and qualification must be confirmed with the seller before any firm offer is made.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | Sept. 4, 2026 |
Alfa Laval Clara 20 / Brew 20 centrifuge for beer clarification, manufactured in 2022.
This self-cleaning disc centrifuge is designed to separate yeast and suspended solids prior to beer maturation or bottling. The unit is mounted on a compact skid that includes the separator, motor, valves, sensors, flow meters, instrumentation, and control cabinet.
Brand: Alfa Laval
Model: Clara 20 / Brew 20
Year: 2022
Product number: 881228-08-02
Control system: Alfa Laval EPC 60 interface
Manufacturer’s capacity: 4 to 15 hl/h depending on the product and settings
Flow rate observed on site: Up to approximately 15 hl/h
Location: Basque Country, France
Price: To be determined after initial contact
Separator specifications:
* Maximum bowl speed: 9,267 rpm
* Drive shaft speed: 3,600 rpm
* Separator frequency: 60 Hz
* Recommended motor power: 4.0 kW
* Maximum density of incoming product: 1,100 kg/m³
* Maximum density of sediments: 1,499 kg/m³
* Maximum density of the operating fluid: 1,000 kg/m³
* Operating temperature: 0 to 100 degrees Celsius
Electrical specifications:
* Power supply: 380 to 500 V AC
* Three-phase power supply
* Frequency: 50 or 60 Hz
* Breaking capacity: 10 kA
* Control voltage: 24 V DC
* Standards: IEC / EN
* Electrical schematic: 9661856844, revision R04
* Control panel manufacturer: Oneness Controlpanels Pvt. Ltd.
* Control panel manufacturing date: April 2022
* Control panel country of origin: India
* CE Declaration available
Operating conditions observed on site:
* Operating speed: Approximately 9,000 rpm
* Typical operating flow rate: 0.8 to 1.2 m³/h, or 8 to 12 hl/h
* Maximum flow rate used: Approximately 15 hl/h
* Inlet and outlet pressure: 4 to 6 bar
* Fermenter pressure: Approximately 0.8 bar
* Available modes: Standby, production, CIP cleaning, discharge, and slurry pump
* Required utilities: Water, compressed air, and electrical power
The hermetic design limits oxygen uptake during clarification. The production, standby, CIP cleaning, and discharge cycles are controlled via the EPC 60 interface. The machine is suitable for cleaning in place (CIP) in accordance with site procedures.
The equipment can be inspected by appointment. Alfa Laval technical documentation, the CE declaration, and internal procedures are available. Accessories, connections, and conditions for disassembly, transport, recommissioning, and qualification must be confirmed with the seller before any firm offer is made.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Alfa Laval Clara 20 / Brew 20 disc centrifuge for beer clarification, manufactured in 2022. This self‑cleaning separator is designed to remove yeast and suspended solids prior to beer maturation or bottling. The unit is skid‑mounted and supplied with separator, motor, valves, sensors, flow meters, instrumentation and a control cabinet with an Alfa Laval EPC 60 interface.
Key identification
- Brand: Alfa Laval
- Model: Clara 20 / Brew 20
- Year: 2022
- Control system: Alfa Laval EPC 60 interface
- CE declaration: available
Separator and process specifications
- Manufacturer’s stated capacity: 4 to 15 hl/h depending on product and settings
- Typical operating flow rate observed: 0.8 to 1.2 m³/h (8 to 12 hl/h); maximum observed up to approximately 15 hl/h
- Maximum bowl speed: 9,267 rpm; observed operating speed approximately 9,000 rpm
- Drive shaft speed: 3,600 rpm; separator frequency: 60 Hz
- Recommended motor power: 4.0 kW
- Maximum densities: incoming product 1,100 kg/m³; sediments 1,499 kg/m³; operating fluid 1,000 kg/m³
- Operating temperature range: 0 to 100 °C
- Hermetic design to limit oxygen uptake during clarification
Electrical and control details
- Power supply: 380 to 500 V AC, three‑phase; frequency 50 or 60 Hz
- Breaking capacity: 10 kA; control voltage: 24 V DC
- Electrical schematic reference: 9661856844, revision R04
- Control panel manufacturer: Oneness Controlpanels Pvt. Ltd.; manufacturing date April 2022; country of origin: India
Operational modes and utilities
- Available modes: standby, production, CIP cleaning, discharge and slurry pump
- Required utilities: water, compressed air and electrical power
- Inlet/outlet pressure reported at 4–6 bar; fermenter pressure reported at approximately 0.8 bar
Documentation, inspection and sale conditions
Alfa Laval technical documentation and the CE declaration are available. The unit is suitable for cleaning‑in‑place in accordance with site procedures. Equipment inspection can be arranged by appointment. Accessories, connections and conditions for disassembly, transport, recommissioning and qualification should be confirmed with the seller before a firm offer is made.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | Sept. 4, 2026 |
Центрофуга Alfa Laval Brew 20 – Система за избистряне на бира – произведена през 2022 г.
Odstředivka Alfa Laval Brew 20 – Systém pro čiření piva – vyrobeno v roce 2022
Alfa Laval Brew 20-centrifuge – System til klaring af øl – fremstillet i 2022
Alfa Laval Brew 20 Zentrifuge – Bierklärungssystem – Baujahr 2022
Φυγόκεντρος Alfa Laval Brew 20 - Σύστημα διαύγασης μπύρας - κατασκευή 2022
Alfa Laval Brew 20 Centrifuge - Beer Clarification System - Manufactured in 2022
Centrífuga Alfa Laval Brew 20 - Sistema de clarificación de cerveza - Fabricada en 2022
Centrifugeuse Alfa Laval Brew 20 - Système de clarification bière - fabrication 2022
Centrifuga Alfa Laval Brew 20 – sustav za bistrenje piva – proizvedena 2022.
Alfa Laval Brew 20 centrifuga – Sörtisztító rendszer – 2022-es gyártású
Centrifuga Alfa Laval Brew 20 - Sistema di chiarificazione della birra - produzione 2022
Centrifuga „Alfa Laval Brew 20“ – alaus skaidrinimo sistema – pagaminta 2022 m.
Alfa Laval Brew 20-centrifuge – Bierzuiveringssysteem – bouwjaar 2022
Wirówka Alfa Laval Brew 20 – system klarowania piwa – rok produkcji 2022
Centrífuga Alfa Laval Brew 20 - Sistema de clarificação de cerveja - fabricada em 2022
Centrifugă Alfa Laval Brew 20 – Sistem de limpezire a berii – fabricată în 2022
Центрифуга Alfa Laval Brew 20 — Система осветления пива — 2022 год выпуска
Alfa Laval Bru 20 centrifuga – sistem za razjašnjavanje piva – proizvedeno 2022. godine
Alfa Laval Brew 20-centrifug – System för klarning av öl – tillverkad 2022
Alfa Laval Brew 20 Santrifüj - Bira arıtma sistemi - 2022 üretimi
English (EU)
English (GB)