| Manufacturer | Arburg |
|---|---|
| Model | ALLROUNDER 270 C 400-100 |
| Year | 2019 |
| Location | Germany
|
Overview:
Hydraulic Arburg ALLROUNDER 270 C 400-100 injection moulding machine, manufactured in 2019. The machine is equipped with ARBURG’s SELOGICA direct control system and is specified with a 400 kN clamping force. The injection unit and screw geometry are sized to provide a calculated stroke volume of up to 31 cm³ and a shot weight (PS) up to 29 g.
Key technical specifications:
- Control system: SELOGICA direct (ARBURG)
- Clamping force: 400 kN
- Opening force: 130 kN
- Opening stroke: max. 350 mm
- Mold mounting height (min.): 200 mm
- Platen distance (max.): 550 mm
- Distance between tie-bars (H x V): 270 x 270 mm
- Size of mold platens (H x V): max. 446 x 446 mm
- Weight of movable mold half: max. 180 kg
- Ejector force / stroke: max. 30 kN / 125 mm
- Dry cycle time (EUROMAP): 1.2 - 189 s-mm
- Injection unit size: 100
- Screw diameter: 20 mm
- Effective screw length (L/D): 25
- Screw stroke: max. 100 mm
- Calculated stroke volume: max. 31 cm³
- Shot weight (PS): max. 29 g
- Material throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h
- Max. injection pressure / holding pressure: 2500 bar / 2500 bar
- Max. injection rate: 64 cm³/s
- Max. screw torque: 120 Nm
- Nozzle contact force / retraction stroke: max. 50 kN / 180 mm
- Heating capacity: 4.95 kW
- Hopper capacity: 1.8 L
Electrical / hydraulic / mass data:
- Operating voltage: 400 V 3~ 50 Hz
- Control voltage: 230 V ~ 50 Hz / 24 V DC
- Motor / heating rated current: 42 A / 11 A
- Total rated current: 53 A
- Total connected load: 29 kW
- Pump motor power: 11 kW
- Hydraulic oil capacity: 165 L
- Net machine weight: 2,180 kg
Notes:
This description lists the machine’s documented technical specifications. No additional accessories, operational condition, testing status, or location details are included here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.- Control System: SELOGICA direct
- Clamping Force: 400 kN
- Opening Force: 130 kN
- Opening Stroke: max. 350 mm
- Mold Mounting Height (min.): 200 mm
- Platen Distance (max.): 550 mm
- Distance Between Tie-Bars (H x V): 270 x 270 mm
- Size of Mold Platens (H x V): max. 446 x 446 mm
- Weight of Movable Mold Half: max. 180 kg
- Ejector Force / Stroke: max. 30 kN / 125 mm
- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm
- Injection Unit Size: 100
- Screw Diameter: 20 mm
- Effective Screw Length (L/D): 25
- Screw Stroke: max. 100 mm
- Calculated Stroke Volume: max. 31 cm³
- Shot Weight (PS): max. 29 g
- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h
- Max. Injection Pressure: 2500 bar
- Max. Holding Pressure: 2500 bar
- Max. Injection Rate: 64 cm³/s
- Max. Screw Torque: 120 Nm
- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm
- Heating Capacity: 4.95 kW
- Hopper Capacity: 1.8 L
- Operating Voltage: 400 V 3~ 50 Hz
- Control Voltage: 230 V ~ 50 Hz / 24 V DC
- Motor / Heating Rated Current: 42 A / 11 A
- Total Rated Current: 53 A
- Total Connected Load: 29 kW
- Pump Motor Power: 11 kW
- Hydraulic Oil Capacity: 165 L
- Net Machine Weight: 2,180 kg
Clamping Force: 400 kN
Control Brand: ARBURG
Control Model: SELOGICA direct
Machine Weight: 2180 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1979 |
| Last activity | Sept. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.- Control System: SELOGICA direct
- Clamping Force: 400 kN
- Opening Force: 130 kN
- Opening Stroke: max. 350 mm
- Mold Mounting Height (min.): 200 mm
- Platen Distance (max.): 550 mm
- Distance Between Tie-Bars (H x V): 270 x 270 mm
- Size of Mold Platens (H x V): max. 446 x 446 mm
- Weight of Movable Mold Half: max. 180 kg
- Ejector Force / Stroke: max. 30 kN / 125 mm
- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm
- Injection Unit Size: 100
- Screw Diameter: 20 mm
- Effective Screw Length (L/D): 25
- Screw Stroke: max. 100 mm
- Calculated Stroke Volume: max. 31 cm³
- Shot Weight (PS): max. 29 g
- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h
- Max. Injection Pressure: 2500 bar
- Max. Holding Pressure: 2500 bar
- Max. Injection Rate: 64 cm³/s
- Max. Screw Torque: 120 Nm
- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm
- Heating Capacity: 4.95 kW
- Hopper Capacity: 1.8 L
- Operating Voltage: 400 V 3~ 50 Hz
- Control Voltage: 230 V ~ 50 Hz / 24 V DC
- Motor / Heating Rated Current: 42 A / 11 A
- Total Rated Current: 53 A
- Total Connected Load: 29 kW
- Pump Motor Power: 11 kW
- Hydraulic Oil Capacity: 165 L
- Net Machine Weight: 2,180 kg
Clamping Force: 400 kN
Control Brand: ARBURG
Control Model: SELOGICA direct
Machine Weight: 2180 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
Hydraulic Arburg ALLROUNDER 270 C 400-100 injection moulding machine, manufactured in 2019. The machine is equipped with ARBURG’s SELOGICA direct control system and is specified with a 400 kN clamping force. The injection unit and screw geometry are sized to provide a calculated stroke volume of up to 31 cm³ and a shot weight (PS) up to 29 g.
Key technical specifications:
- Control system: SELOGICA direct (ARBURG)
- Clamping force: 400 kN
- Opening force: 130 kN
- Opening stroke: max. 350 mm
- Mold mounting height (min.): 200 mm
- Platen distance (max.): 550 mm
- Distance between tie-bars (H x V): 270 x 270 mm
- Size of mold platens (H x V): max. 446 x 446 mm
- Weight of movable mold half: max. 180 kg
- Ejector force / stroke: max. 30 kN / 125 mm
- Dry cycle time (EUROMAP): 1.2 - 189 s-mm
- Injection unit size: 100
- Screw diameter: 20 mm
- Effective screw length (L/D): 25
- Screw stroke: max. 100 mm
- Calculated stroke volume: max. 31 cm³
- Shot weight (PS): max. 29 g
- Material throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h
- Max. injection pressure / holding pressure: 2500 bar / 2500 bar
- Max. injection rate: 64 cm³/s
- Max. screw torque: 120 Nm
- Nozzle contact force / retraction stroke: max. 50 kN / 180 mm
- Heating capacity: 4.95 kW
- Hopper capacity: 1.8 L
Electrical / hydraulic / mass data:
- Operating voltage: 400 V 3~ 50 Hz
- Control voltage: 230 V ~ 50 Hz / 24 V DC
- Motor / heating rated current: 42 A / 11 A
- Total rated current: 53 A
- Total connected load: 29 kW
- Pump motor power: 11 kW
- Hydraulic oil capacity: 165 L
- Net machine weight: 2,180 kg
Notes:
This description lists the machine’s documented technical specifications. No additional accessories, operational condition, testing status, or location details are included here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1979 |
| Last activity | Sept. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Шприцмашина Arburg ALLROUNDER 270 C 400-100
Vstřikovací lis Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Sprøjtestøbemaskine
Arburg ALLROUNDER 270 C 400-100 Spritzgießmaschine
Πρέσα έγχυσης Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Injection moulding machine
Inyectora Arburg ALLROUNDER 270 C 400-100
Presse à injecter Arburg ALLROUNDER 270 C 400-100
Stroj za injekcijsko prešanje Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Fröccsöntőgép
Pressa a iniezione Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Įpurškimo liejimo staklės
Arburg ALLROUNDER 270 C 400-100 Spuitgietmachine
Wtryskarka Arburg ALLROUNDER 270 C 400-100
Injetora Arburg ALLROUNDER 270 C 400-100
Mașină de injectat Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Термопластавтомат
Mašina za injekciono prešanje Arburg ALLROUNDER 270 C 400-100
Arburg ALLROUNDER 270 C 400-100 Formsprutningsmaskin
Enjeksiyon makinesi Arburg ALLROUNDER 270 C 400-100
English (EU)
English (GB)