| Category | Offset presses - 2 colours |
| Max. paper length | 20.47244 in |
| Max. paper width | 20.47244 in |
| Nbr of copies | 0.9 Mio |
| Perfecting | No |
| Dryer | UV |
| Coating unit | No |
| Chromed cylinders | Yes |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Heidelberg SM 52 2 |
| Last availability date | 03/09/2026 |
| Product id | P260813058 |
| Language |
Manufacturer: Heidelberg
Model: SM 52 2P
Year of manufacture: 1996
Type: 2-colour offset press
Status: Spare-parts machine / repair project
Condition: As-is, where-is
Overview:
This listing is for a Heidelberg SM 52 2P two-colour press offered strictly as a spare-parts unit or repair project. It is not being offered as a guaranteed working press and should be considered for dismantling for parts or for a rebuild.
Key equipment and systems (as reported):
- Dampening system: Alcolor dampening system
- Recirculation: technotrans recirculation system present
- Side lay control: present
- Sheet decurler: present
- Powder spray: present
- Antistatic device: Eltex
- Cylinders: reported free from damage/repairs
- Controls/Electronics: EWK1 control board is faulty
- Perfecting: not operational; intensifier requires repair
- Compressor: no compressor included
Usage indicator:
- Impressions reported: approximately 161 million impressions
Important notes:
- The perfecting function is non-functional due to an intensifier issue; this is noted in the unit’s condition.
- The EWK1 control board is faulty and will require repair or replacement to restore electronic control functions.
- No compressor is supplied with the machine.
Suitability:
Intended primarily for use as a source of spare parts or as the basis for a repair/restoration project. Sold as-is, where-is; no statements are made here about testing, operational status beyond the faults noted, refurbishment, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Heidelberg
Model: SM 52 2P
Year of Manufacture: 1996
Type: 2 Colour Press
Status: Spare parts machine only
Sheet Size: Not specified
Impressions: Approx 161 Mil Imp
Dampening system: Alcolor dampening system
Recirculation: With technotrans recirculation
Side lay control: Present
Sheet decurler: Present
Powder spray: Present
Antistatic device: Eltex
Cylinders: Free from damage/ repairs
Controls/Electronics: Ewk1 control board faulty
Perfecting: Not working as the intensifier needs repair
Compressor: No compressor
Condition notes: As-is, where-is
Notes: Perfecting not functioning due to intensifier issue; suitable for spare parts or repair project
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 14 |
| Last activity | Sept. 2, 2026 |
As New Printing Machinery is a trusted Australian specialist in high quality used printing, bindery, packaging, and finishing equipment. With a strong focus on value, reliability, and performance, the company helps businesses access “as new” machinery solutions at competitive prices.
Serving both domestic and international markets, As New Printing Machinery provides a smart and cost effective alternative to buying new equipment. Its carefully selected portfolio supports printers and manufacturers looking to optimize production while controlling investment costs.
Driven by industry expertise and a customer focused approach, the company connects buyers and sellers worldwide, delivering dependable machinery solutions tailored to modern printing and packaging operations.
Manufacturer: Heidelberg
Model: SM 52 2P
Year of Manufacture: 1996
Type: 2 Colour Press
Status: Spare parts machine only
Sheet Size: Not specified
Impressions: Approx 161 Mil Imp
Dampening system: Alcolor dampening system
Recirculation: With technotrans recirculation
Side lay control: Present
Sheet decurler: Present
Powder spray: Present
Antistatic device: Eltex
Cylinders: Free from damage/ repairs
Controls/Electronics: Ewk1 control board faulty
Perfecting: Not working as the intensifier needs repair
Compressor: No compressor
Condition notes: As-is, where-is
Notes: Perfecting not functioning due to intensifier issue; suitable for spare parts or repair project
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Offset presses - 2 colours |
| Max. paper length | 20.47244 in |
| Max. paper width | 20.47244 in |
| Nbr of copies | 0.9 Mio |
| Perfecting | No |
| Dryer | UV |
| Coating unit | No |
| Chromed cylinders | Yes |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Heidelberg SM 52 2 |
| Last availability date | 03/09/2026 |
| Product id | P260813058 |
| Language |
Manufacturer: Heidelberg
Model: SM 52 2P
Year of manufacture: 1996
Type: 2-colour offset press
Status: Spare-parts machine / repair project
Condition: As-is, where-is
Overview:
This listing is for a Heidelberg SM 52 2P two-colour press offered strictly as a spare-parts unit or repair project. It is not being offered as a guaranteed working press and should be considered for dismantling for parts or for a rebuild.
Key equipment and systems (as reported):
- Dampening system: Alcolor dampening system
- Recirculation: technotrans recirculation system present
- Side lay control: present
- Sheet decurler: present
- Powder spray: present
- Antistatic device: Eltex
- Cylinders: reported free from damage/repairs
- Controls/Electronics: EWK1 control board is faulty
- Perfecting: not operational; intensifier requires repair
- Compressor: no compressor included
Usage indicator:
- Impressions reported: approximately 161 million impressions
Important notes:
- The perfecting function is non-functional due to an intensifier issue; this is noted in the unit’s condition.
- The EWK1 control board is faulty and will require repair or replacement to restore electronic control functions.
- No compressor is supplied with the machine.
Suitability:
Intended primarily for use as a source of spare parts or as the basis for a repair/restoration project. Sold as-is, where-is; no statements are made here about testing, operational status beyond the faults noted, refurbishment, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 14 |
| Last activity | Sept. 2, 2026 |
As New Printing Machinery is a trusted Australian specialist in high quality used printing, bindery, packaging, and finishing equipment. With a strong focus on value, reliability, and performance, the company helps businesses access “as new” machinery solutions at competitive prices.
Serving both domestic and international markets, As New Printing Machinery provides a smart and cost effective alternative to buying new equipment. Its carefully selected portfolio supports printers and manufacturers looking to optimize production while controlling investment costs.
Driven by industry expertise and a customer focused approach, the company connects buyers and sellers worldwide, delivering dependable machinery solutions tailored to modern printing and packaging operations.