New offers - Plastic - Rubber 315

We present to your attention a thermoforming machine manufactured by the Canadian company GN Thermoforming Equipment. This equipment is in full working condition and meets all the functional specifications set by the manufacturer. Technical specifications: 560 mm x 508 mm forming area. 120 mm maximum draw depth. Material thickness up to 1 mm. 55 mm maximum film width. 20 cycles per minute productivity. 5.5 kW/h power consumption. 6.8 bar operating air pressure. Design features and advantages: The machine uses contact heating technology, which, combined with high-quality assembly, ensures reliable operation over a long period. The main components include the heating plate, main pneumatic cylinder, film feed mechanism, and waste winding device. Key benefits of the offer: 1. Cost-effectiveness: low cost of tooling (molds). 2. Precision: complete absence of die-cut misalignment. 3. Efficiency: low percentage of technological waste. Equipment information: Year of manufacture: 1998

Second hand PP/PS 3-5 layer cast film line RBSDMS-IZS-678 Main parameters: 0,3-1 mm maximum film thickness Film width up to 1600 mm Output: 450 kg/hour In very good working conditions Year of construction: 2016 Producer: Rolbatch Notes: The customer never started production. The line is working and can be tested in Eberswalde (Berlin) Offer Ref nr: RBEKCM-678 The extrusion line consist of: single screw extruder 75 mm x 2 pieces single screw extruder 120 mm x 1 piece manual screen changer x 3 pieces calander x 1 set temperature control system haul-off hooper for the extruders x 3 pieces automatic lenght measurement of the film kniefes x 1 set winders - set of 3 pieces acumulation system for easy roll changing PLC control panel

ZENO ZTLL 1600x1600 – Food Waste Disposer – 2015 For sale: unused ZENO single-pass waste shredder, model ZTLL 1600x1600, manufactured by the German company ZENO Zerkleinerungsmaschinenbau Norken GmbH. Model: ZTLL 1600x1600 Year of manufacture: 2015 Weight: approx. 8,400 kg Main motor: Power: 55 kW Current: 99 A Voltage: 400/690 V Speed: 1,480 rpm Hydraulic motor: Power: 2.2 kW Current: 5.0 A Voltage: 400/690 V Speed: 1,450 rpm The unit is in good working condition and has never been used. The control cabinet is missing. On-site inspection is available. Please contact us to discuss details, price, and shipping terms.

Offer title: OWS2x15kw Machine Model: OWS2x15kw Manufacturer: Not specified Year of manufacture: 2026 Technical condition: Excellent Motors: 2 × 15 kW Total power: 30 kW Gearbox: 2 × ZQ500 Knives: Ø300 × 20 mm Knife material: Wear-resistant hardened steel Main shaft diameter: Ø160 mm Cutting chamber size: 600 × 550 mm Capacity: approx. 1000–1800 kg/hour Machine dimensions: 2700 × 1350 × 1800 mm Weight: approx. 3300 kg Certification: CE marked Key benefits: Two independent 15 kW motors for high cutting force and smooth operation; Large 600 × 550 mm cutting chamber; Up to 1800 kg/hour processing capacity; Sturdy and durable steel construction; Wear-resistant, hardened steel knives; Overload protection system; Designed for continuous, intensive industrial work Applications: Plastic waste; Rubber; Textile industry waste; Manufacturing and industrial waste; Woodworking and furniture industry waste; Various recyclable materials Delivery: Delivery to Hungary available; Video demonstration available; VAT invoice issued Notes: Standalone unit or can be integrated into a complete technological or recycling line

A complete shredding system consisting of two MOCO AZ 11 twin-shaft shredders (a preliminary and final shredder) with a dedicated control cabinet. Ideal for processing and recycling plants for cardboard and aseptic packaging. The unit has been barely used, is in good working order, and has been stored in a heated warehouse. 1) MOCO AZ 11 preliminary shredder Year of manufacture: 2014 Drive: 15 kW, 1450:37 RPM, direct start Power supply: 400/690 V - 50 Hz Protection: IP 65, insulation class F Comminution chamber: 500 x 500 mm Knives: 19 mm wide, double Weight: 950 kg 2) MOCO AZ 11 final shredder Year of manufacture: 2014 Drive: 22 kW, 1450:53 RPM, direct start Power supply: 400/690 V - 50 Hz Protection: IP 55, insulation class F Comminution chamber: 509 x 500 mm Knives: 19 mm wide Single Weight: 1050 kg Construction of both shredders: Housing and gearbox made of welded, stress-relieved steel to eliminate stress. Bearings with stainless steel plates. Integrated reduction gear box equipped with oil cooling. Two counter-rotating toothed shafts, each equipped with specially hardened steel blades – individually replaceable blades. Two segmented scrapers reinforced with plates. The system includes a hopper and a support structure. 3) Control …

COMBINATION LOT – (COMPLETE FILL/ PACK LINE 4) OFFERED FOR SALE AS A ONE LOT CONTRACT (please note the final highest bid on this lot will only be accepted if the accumulative total for lots 535 to 543 are lower than the final highest bid on )

COMBINATION LOT – (COMPLETE FILL/ PACK LINE 2) OFFERED FOR SALE AS A ONE LOT CONTRACT (please note the final highest bid on this lot will only be accepted if the accumulative total for lots 511 to 518 are lower than the final highest bid on )

COMBINATION LOT – (COMPLETE FILL/ PACK LINE 1) OFFERED FOR SALE AS A ONE LOT CONTRACT (please note the final highest bid on this lot will only be accepted if the accumulative total for lots 500 to 509A are lower than the final highest bid on )

Model: BJLM-1800 (120/70) Type: AB Co-Extrusion Laminating Line Screw Diameter: Ø 120mm/ Ø 70mm Working Width: 900-1600 mm Lamination Thickness: 0. 10-0.60 mm Capacity: 450-500kg/h Line Speed: 50m/min Applicable Resins: LDPE, LLDPE, PP, EVA, TPE Main Extruder (Ø 120mm / 110kW) Sub Extruder (Ø 70mm/ 45kW) 1800mm T-Die + AB Distributor Coating Unit (Pre-heating / Rubber / Cooling rollers) Main & Sub Unwinder Tension Control System Trimming Unit Traction Unit Main Winder & Sub Winder

Type Granulator (1200kg/h) Make RAPID Model Granulator 500 Series 500-120 Year of Manufacture 2003 Condition Used Quantity 1 Item Description: Lot consists of: (1) Granulator (1200kg/h) Technical Details: Rapid 45120 granulator machine. Rapid Granulator 500-120 Specifications Producer: Rapid Granulator AB Year of production: 2003 Model: Rapid Granulator 500 Series 500-120 Throughput capacity: Up to 1,200 kg/h Throughput capacity (inner liner and door liner grinding): Approx. 450-500 kg/h Rotor diameter: 450 mm Rotor type: 3-blade, open Rotating knives: 6 (3 × 2) standard Fixed knives: 4 (2 × 2) standard Additional fixed knives: Optional for higher capacities Cutterhouse (Super-Tangential): 1,220 × 580 mm Motor power: 37 kW Weight: 3,600 kg Standard screen hole diameter: 8 mm . Further Information Asset Location Electrolux Jasbereny, HU Delivery Conditions EXW (Incoterms 2020) Sale on an as-is, where-is basis, ex location Payment Term Immediately after Invoice Receipt If you receive a surcharge - more information on the Invoice Seller Maynards Europe GmbH Maynards is selling and issues the Invoice in order and in the name of the mentioned Seller Test This website’s original content is provided in English. Translations into other languages are AI-generated and offered solely for user convenience; they may contain errors or …