New offers - Plastic - Rubber 315

Second hand PP/PS 3-5 layer cast film line RBSDMS-IZS-678 Main parameters: 0,3-1 mm maximum film thickness Film width up to 1600 mm Output: 450 kg/hour In very good working conditions Year of construction: 2016 Producer: Rolbatch Notes: The customer never started production. The line is working and can be tested in Eberswalde (Berlin) Offer Ref nr: RBEKCM-678 The extrusion line consist of: single screw extruder 75 mm x 2 pieces single screw extruder 120 mm x 1 piece manual screen changer x 3 pieces calander x 1 set temperature control system haul-off hooper for the extruders x 3 pieces automatic lenght measurement of the film kniefes x 1 set winders - set of 3 pieces acumulation system for easy roll changing PLC control panel

Manufacturer: Tecnova S.r.l., Italy Model: ES130/37D DEG Year of manufacture: 2005 Overview: Plastic recycling and regranulation line for thermoplastics, combining extrusion, degassing, melt filtration, pelletizing, cooling and drying in one complete production process Extruder type: Single-screw recycling extruder Screw diameter: 130 mm L/D ratio: 37:1 Degassing: Vacuum degassing system (DEG) Temperature control: 6 individually controlled barrel zones Barrel heating: Electrical heating Barrel cooling: Forced-air cooling with individual cooling fans Total heating capacity: Approximately 110.6 kW Melt filtration: Hydraulic screen changer Melt pressure monitoring: Yes Pelletizing system: Hot-cut / die-face pelletizing system Pellet cooling: Water-cooled Pellet drying: Centrifugal drying system Drive: Main extruder motor with industrial gearbox Applications: Plastic recycling and regranulation Process stages: Extrusion, degassing, melt filtration, pelletizing, cooling and drying Line configuration: Main extruder with degassing/vacuum equipment, hydraulic melt filtration, die-face cutting system, water cooling and centrifugal pellet drying equipment Control system: Industrial control system for monitoring extrusion, temperature regulation and melt pressure monitoring Condition: Used industrial recycling installation Origin: Italy Documentation: Technical documentation/manuals available Inspection/technical information: Available upon request

The line was overhauled by the seller: The cylinders and screw were adjusted, the DC motor was completely rebuilt with speed control, and we installed new temperature controllers, a new accumulator, and new solenoid valves. The line probably dates back to the 1990s; the seller has recommissioned it. It's an older line, meaning it doesn't have an inverter; it's very easy to work with, especially on small batches. Purchased about 18 months ago for a project in Romania, which, however, didn't get off the ground due to changing economic conditions: plastics, energy, and transportation costs. The mold for the 5-liter canisters is new and was made last year. It produced approximately 1,300 canisters. The plug mold and scrap cutting tools are new and made in Italy. The blow mold, including the control unit and control panel, are also included in the mold. A very large, functioning 60-liter refrigerator is also included in the blow molding line, along with another identical refrigerator as spare parts. In addition to the remaining caps, approximately 4,500 pieces, and 450 separator boxes (the caps are produced at Tecnopast Rimini, a widely used part number), the cap size is suitable for the 5-liter canister. Sold as …

We present to your attention a thermoforming machine manufactured by the Canadian company GN Thermoforming Equipment. This equipment is in full working condition and meets all the functional specifications set by the manufacturer. Technical specifications: 560 mm x 508 mm forming area. 120 mm maximum draw depth. Material thickness up to 1 mm. 55 mm maximum film width. 20 cycles per minute productivity. 5.5 kW/h power consumption. 6.8 bar operating air pressure. Design features and advantages: The machine uses contact heating technology, which, combined with high-quality assembly, ensures reliable operation over a long period. The main components include the heating plate, main pneumatic cylinder, film feed mechanism, and waste winding device. Key benefits of the offer: 1. Cost-effectiveness: low cost of tooling (molds). 2. Precision: complete absence of die-cut misalignment. 3. Efficiency: low percentage of technological waste. Equipment information: Year of manufacture: 1998